NAME    [Toc]    [Back]

     sbsh -- Granch SBNI16 SHDSL modem device driver

SYNOPSIS    [Toc]    [Back]

     device sbsh

DESCRIPTION    [Toc]    [Back]

     The sbsh driver provides support for an internal PCI modem SBNI16-SHDSL.
     A device is introduced to the OS as a common Ethernet-like network card
     which must be configured with ifconfig(8) (all standard network interface
     parameters could be set).	Modem-specific parameters (master/slave mode,
     line rate, etc.) must be set with the sb16config utility before interface
     activation.

DIAGNOSTICS    [Toc]    [Back]

     sbsh%d: couldn't map memory
     sbsh%d: couldn't map interrupt
     sbsh%d: couldn't set up irq  A fatal initialization error has occurred.

     sbsh%d: unable to load firmware  A fatal error has occurred while
     sb16config was running.

     sbsh%d: firmware wasn't loaded  ``ifconfig ... up'' has failed because
     device has not been configured with sb16config.

     sbsh%d: transmit timeout
     sbsh%d: interrupt posted but not delivered  Probably, a hardware error or
     incompatibility.

     sbsh%d: unable to get mbuf
     sbsh%d: unable to get mbuf cluster  The driver failed to allocate a memory
 buffer.

FILES    [Toc]    [Back]

     The sources for the driver reside in:

     /sys/dev/sbsh/if_sbsh.c
     /sys/dev/sbsh/if_sbshreg.h

SEE ALSO    [Toc]    [Back]

     arp(4), netintro(4), ifconfig(8)

     ports/sysutils/sb16config

HISTORY    [Toc]    [Back]

     The sbsh device driver first appeared in FreeBSD 4.9.

AUTHORS    [Toc]    [Back]

     The sbsh driver was written by Denis I. Timofeev <[email protected]>.


FreeBSD 5.2.1			April 11, 2003			 FreeBSD 5.2.1