|
|
|
snmp_trapsnd(8) -- A program that sends SNMPv1 and SNMPv2 traps
|
|
The snmp_trapsnd program encodes an SNMPv1 Trap protocol data unit (PDU) (see RFC 1215) or a SNMPv2 Trap PDU (see RFC 1905) into an SNMP message, and sends it to the specified host(s). All data fields... |
|
spray(8) -- Spray packets
|
|
The spray command uses RPC to send a one-way stream of packets to the specified host and reports how many were received, as well as the transfer rate. The host argument can be either a name or an Inte... |
|
|
sprayd(8) -- Spray server
|
|
The rpc.sprayd daemon is a server that records the packets sent by the spray(8) command. The rpc.sprayd daemon is normally invoked by the inetd(8) daemon by removing the comment character (#) at the b... |
|
srconfig(8) -- Displays and controls source routing functions and parameters for communication on token ring networ...
|
|
The srconfig command reads and modifies entries in the your local system's source routing database. For every remote system on an extended token ring network with which your local system communicates... |
|
sshd(8) -- Secure shell daemon
|
|
The sshd2 Secure Shell daemon runs on the Secure Shell server. It is normally run as root, and is the server counterpart for ssh2. Together, these programs replace and extend the rlogin and rsh servic... |
|
sshd-check-conf(8) -- Checks what the configuration allows or denies based on the incoming user and/or the host name
|
|
The sshd-check-conf command checks how the sshd2 daemon will react to an incoming user, based on the user name and the remote host name given as parameters. The following parameters are checked: Allow... |
|
sshd2(8) -- Secure shell daemon
|
|
The sshd2 Secure Shell daemon runs on the Secure Shell server. It is normally run as root, and is the server counterpart for ssh2. Together, these programs replace and extend the rlogin and rsh servic... |
|
startppp(8) -- Starts the pppd daemon for PPP dial-in connections
|
|
A system configured for PPP dial-in connections answers calls from remote systems. If your system is configured as a PPP dial-in system, a getty process is continuously run on the serial line that is ... |
|
startslip(8) -- Configures SLIP connections
|
|
The startslip program configures two types of SLIP connections: Dial-in connections -- The system is to answer calls from remote systems. Dial-out connections -- The system is to place calls to a remo... |
|
startup(8) -- Provide accounting commands for shell scripts
|
|
There are a number of commands in the /usr/sbin/acct directory that, along with other accounting commands, enable you to produce a wide range of system accounting records and files. For example, the r... |
|
statd(8) -- Network status monitor daemon
|
|
The rpc.statd daemon monitors the status of the client and server sites in response to a request made by the local rpc.lockd daemon. When a site failure is detected, the rpc.statd daemon notifies the ... |
|
strace(8) -- Writes STREAMS event trace messages to standard output
|
|
The strace command gets STREAMS event trace messages from STREAMS drivers and modules via the STREAMS log driver (strlog), and writes these messages to standard output. You can limit the messages stra... |
|
strclean(8) -- Removes outdated STREAMS error log files
|
|
The strclean command cleans the STREAMS error logger directory of log files (error.mm-dd) that contain error messages sent by the STREAMS log driver (strlog). If no other directory is specified (the l... |
|
strerr(8) -- Receives error messages from the STREAMS log driver
|
|
The strerr daemon receives error messages from the STREAMS log driver (strlog) for addition to the STREAMS error log files (error.mm.dd) in the STREAMS error logger directory (/var/adm/streams by defa... |
|
stripe(8) -- Stripes a file across several volumes in an AdvFS domain.
|
|
The stripe utility enables you to improve the read/write performance of a file. The stripe utility directs a zerolength file (a file with no data written to it yet) to be spread evenly across several ... |
