syssgi(2) syssgi(2)
syssgi - Silicon Graphics Inc. system call
#include <sys/syssgi.h>
ptrdiff_t syssgi (int request, ...);
syssgi is a system interface specific to Silicon Graphics systems. The
value of the request parameter determines the meaning of the remaining
arguments. In the descriptions below, arg1, arg2, and arg3 refer to
parameters following the request argument. The following requests are
currently supported:
SGI_SYSID Returns an identifier for the given system. This identifier
is guaranteed to be unique within the Silicon Graphics
product family. The argument arg1 for this request should be
a pointer to a character buffer of MAXSYSIDSIZE characters.
SGI_RDNAME Returns the process name for the process id specified in
arg1. The arguments arg2 and arg3 give the address and
length, respectively, of the buffer which will receive the
name string. This name corresponds to the name in the
COMMAND column of ps(1) for the given process. The returned
string will be null-terminated unless the caller's buffer is
too small, in which case the string is simply truncated at
the size of the buffer. The return value gives the number of
bytes copied to the buffer, which will be the minimum of the
size of the buffer and the size of the field in the user
structure that contains the process name. Note that this
means that the returned length will typically be greater than
the actual length of the name string (in the sense of
strlen(3)).
SGI_RDUBLK Was an obsolete feature and has been discontinued. Users are
directed to the process filesystem (see proc(4).) to obtain
information about a process.
SGI_PROCSZ Was an obsolete feature and has been discontinued. Users are
directed to the process filesystem (see proc(4).) to obtain
information about a process.
SGI_TUNE This request allows the superuser to redefine tunable
variables to more accurately reflect system use. The
argument arg1 is a buffer pointer which specifies a group
name of the tunable variable. The argument arg2 is a buffer
pointer which holds the address of the tunable variable.
arg3 should be a buffer containing the tune value.
systune(1M) is the preferred way to change these variables.
This system call is only supported for 64 bit programs when
running on 64 bit kernels.
Page 1
syssgi(2) syssgi(2)
SGI_IDBG Used internally for kernel debugging.
SGI_INVENT Returns information about the hardware inventory of the
system. If arg1 is SGI_INV_SIZEOF then the size of an
individual inventory item is returned. If arg1 is
SGI_INV_READ then arg3 bytes worth of inventory records are
read into the buffer specified by arg2. Applications should
use getinvent(3) to access this information; this internal
interface may change.
SGI_SETLED If arg1 is 1, turn on an LED on the machine. 0 turns it off.
This is only available on some SGI computers.
SGI_SETNVRAM [Toc] [Back]
Sets nvram variable with given value. Nvram variables are
subset of IRIS PROM Monitor environment variables, which are
saved in EEPROM, and the values of which are preserved over
power cycle. arg1 is a buffer pointer which specifies a name
of nvram variable. arg2 is a buffer pointer which holds the
value of the nvram variable. Both buffers pointed by arg1
and arg2 must be at least 128 bytes long.
SGI_GETNVRAM [Toc] [Back]
Retrieve values of the IRIS PROM Monitor environment
variables. (see sgikopt(2)). arg1 is a buffer pointer which
specifies either name or index of a IRIS PROM Monitor
variable. Both name and index must be ASCII string. arg2 is
a buffer pointer in which the value be returned. Both
buffers pointed by arg1 and arg2 should be at least 128 bytes
long.
SGI_SETSID [Toc] [Back]
SGI_SETPGID
SGI_SYSCONF
SGI_PATHCONF
SGI_SETGROUPS
SGI_GETGROUPS
SGI_SETTIMEOFDAY
SGI_SPROFIL
SGI_RUSAGE
SGI_SIGSTACK
SGI_NETPROC
SGI_NFSCNVT
SGI_GETPGID
SGI_GETSID
SGI_MPCWAROFF
SGI_SPIPE
SGI_FDHI
SGI_CREATE_UUID
SGI_GETASH
SGI_SETASH
SGI_GETPRID
Page 2
syssgi(2) syssgi(2)
SGI_GETDFLTPRID [Toc] [Back]
SGI_SETPRID
SGI_GETSPINFO
SGI_SETSPINFO
SGI_ARSESS_CTL
SGI_ARSESS_OP
SGI_NEWARRAYSESS
These are all interfaces that are used to implement various
libc functions. These are all subject to change and should
not be called directly by applications.
SGI_GETPLABEL [Toc] [Back]
SGI_SETPLABEL
SGI_GETLABEL
SGI_SETLABEL
SGI_SATREAD
SGI_SATWRITE
SGI_SATCTL
SGI_LOADATTR
SGI_UNLOADATTR
SGI_RECVLUMSG
SGI_PLANGMOUNT
SGI_GETPSOACL
SGI_SETPSOACL
These are all interfaces that are used to implement various
libc and libnsl (enhanced security) functions. These are all
subject to change and should not be called directly by
applications.
SGI_READB [Toc] [Back]
SGI_WRITEB These are used to read and write character special devices
that are greater than 2Gb. arg1 is the file descriptor
pointing to a character special device. arg2 is a buffer in
the user's space where the data will be transferred from or
to. arg3 is the block (512 bytes) offset of where to start
the transaction. arg4 is the number of blocks to transfer.
This interface is superseded in IRIX Release 5.3 by the use
of lseek64, which provides 64-bit seek offsets.
SGI_SSYNC Synchronously flush out all delayed write buffers.
SGI_BDFLUSHCNT [Toc] [Back]
Allows the calling process to delay the kernel from writing
out delayed write buffers by arg1 seconds. After that, the
normal flush delay will apply. At the end of the system
call, the kernel will return the old flush delay. This
system call is intended to be used in conjunction with the
SGI_SSYNC system call on a single processor machine to
provide the calling process with an environment that is free
of any unwanted disk activities for the period of arg1
seconds.
Page 3
syssgi(2) syssgi(2)
SGI_QUERY_FTIMER [Toc] [Back]
Used by ftimer(1).
SGI_CYCLECNTR_SIZE [Toc] [Back]
Returns the size of the integer needed to read the cycle
counter. This is useful along with SGI_QUERY_CYCLECNTR to
write machine independent code to read the free running
hardware counter. On some machines the value needs to be
read into a 32 bit integer, and on others the cycle counter
needs to be read into a 64 bit integer.
SGI_QUERY_CYCLECNTR [Toc] [Back]
It is best to use the clock_gettime(2) interface with the
CLOCK_SGI_CYCLE clock instead of mapping the counter
yourself. This is a much more portable solution. That said,
this syssgi option returns information about the free running
hardware counter on systems that support a high resolution
timer. Upon successful completion, an address for the
counter is returned. The size of the integer needed to hold
the count can be found using the SGI_CYCLECNTR_SIZE syssgi
call.
On machines with 64-bit counters it can either be read with
two separate 32-bit accesses (one at the returned address,
and the other at the returned address plus four), or with a
single 64-bit "long long" access in MIPS3 or MIPS4
applications.
The address must be mapped read-only into the user process
space via the mmap(2) system call into /dev/mmem before any
access can be made. Not all systems return page aligned
addresses, so the address must be masked to be page aligned,
and the offset added back to the returned mmap address, in
order for code to work on all systems, so typically you would
see code like this (ignoring error checking):
#include <stddef.h>
#include <sys/types.h>
#include <fcntl.h>
#include <sys/mman.h>
#include <sys/syssgi.h>
#if CYCLE_COUNTER_IS_64BIT
typedef unsigned long long iotimer_t;
#else
typedef unsigned int iotimer_t;
#endif
__psunsigned_t phys_addr, raddr;
unsigned int cycleval;
volatile iotimer_t counter_value, *iotimer_addr;
int fd, poffmask;
Page 4
syssgi(2) syssgi(2)
poffmask = getpagesize() - 1;
phys_addr = syssgi(SGI_QUERY_CYCLECNTR, &cycleval);
raddr = phys_addr & ~poffmask;
fd = open("/dev/mmem", O_RDONLY);
iotimer_addr = (volatile iotimer_t *)mmap(0, poffmask, PROT_READ,
MAP_PRIVATE, fd, (off_t)raddr);
iotimer_addr = (iotimer_t *)((__psunsigned_t)iotimer_addr +
(phys_addr & poffmask));
counter_value = *iotimer_addr;
For the Challenge/ONYX and OCTANE families 64-bit counter, define
CYCLE_COUNTER_IS_64BIT. Sixty-four bit (MIPS 3, MIPS 4) applications
may simply use the example above with CYCLE_COUNTER_IS_64BIT defined.
Thirty-two bit applications need to read the halves separately and
check for wrap-around. Pass iotimer_addr and two unsigned int pointers
to the following routine:
void read_time(volatile unsigned *iotimer_addr,
unsigned *high, unsigned *low)
{
while (1) {
*high = *iotimer_addr;
*low = *(iotimer_addr + 1);
if (*high == *iotimer_addr) {
return;
}
}
}
This will put the top and bottom 32 bits of the time into the memory
pointed to by high and low, respectively. If you only need 32-bit
precision, you may use the original example but replace the
counter_value assignment with
counter_value = *(iotimer_addr + 1);
SGI_SETTIMETRIM [Toc] [Back]
changes the value of timetrim from the initial value
configured in /var/sysgen/mtune/kernel (see lboot(1M) and
adjtime(2)). The argument arg1 is interpreted as an integer,
which gives the new value of timetrim.
SGI_GETTIMETRIM [Toc] [Back]
obtains the current value of timetrim. The argument arg1
must be a pointer to an integer, into which the timetrim
value is stored.
SGI_SET_AUTOPWRON [Toc] [Back]
Is used to set the time at which the system will
automatically power on (if it is powered off at that time).
Page 5
syssgi(2) syssgi(2)
If the system is not powered off at that time (hasn't yet
been shutdown and powered off), the call has no effect.
Rebooting the system clears the value. This is currently
implemented only on OCTANE, Indy, Indigo2 and Challenge M
systems. The 3rd argument is a time_t whose value is the
time in seconds from 1 Jan 1970 midnight GMT at which to turn
the system on. Also see the wakeupat(1M) man page. See the
ENOPKG description below for systems not implementing this
function.
SGI_IOPROBE [Toc] [Back]
SGI_CONFIG These are used by lboot(1M) to determine the system
configuration.
SGI_MCONFIG Is used by lboot(1M) and ml(1M) to load, register, unload,
unregister and list dynamically loadable kernel modules.
This is subject to change and should not be called directly
by applications.
SGI_TOSSTSAVE [Toc] [Back]
Used by runtime linkers to remove any saved text address
spaces.
SGI_GET_UST This interface is used to implement various libdmedia
functions. It is subject to change and should not be called
directly by applications.
SGI_SET_FP_PRECISE [Toc] [Back]
Modifies floating point exception mode for the current
process. This is only meaningful on processors that support
multiple modes. On these processors, the default mode is
usually performance mode (also called imprecise exception
mode) and non-sequential memory (nsmm) mode. On all other
processors, the default is precise exception and sequential
(smm) mode.
arg1 should be non-zero in order to enable precise exception
mode. A value of zero will disable precise exception mode
thereby enabling performance mode.
In precise exception mode, all floating point
exceptions/interrupts are reported on the instruction that
caused the exception, so floating point signal handlers can
clean up the FP state and continue execution. In performance
mode, floating point interrupts are asynchronous and the
reported program counter is meaningless. Precise mode is
provided as a means of debugging processes and/or backward
compatibility for programs that have knowledge of the FP
state. It causes significant performance degradation.
Page 6
syssgi(2) syssgi(2)
Currently this call only has an affect on machines with an
R8000 processor since that is the only processor which
supports this dual execution mode.
SGI_GET_FP_PRECISE [Toc] [Back]
Returns the floating point exception mode for the current
process. A zero value indicates that precise exception mode
is disabled.
SGI_FP_IMPRECISE_SUPP [Toc] [Back]
Returns non-zero if the current processor supports imprecise
exceptions for floating point instructions.
SGI_SET_CONFIG_SMM [Toc] [Back]
Modifies the memory model for floating point instructions for
the current process. Non-sequential memory access mode
(turned on by default on processors that support it) allows
the processor to do floating point and integer memory
operations out of order, thus possibly providing better
performance.
SGI_GET_CONFIG_SMM [Toc] [Back]
Returns non-zero if the current process is in sequential
memory mode.
SGI_CONFIG_NSMM_SUPP [Toc] [Back]
Returns non-zero if the current processor supports nonsequential
memory operations.
SGI_SET_FP_PRESERVE [Toc] [Back]
Forces floating point state information (precise/imprecise
exception mode as well as sequential/non-sequential memory
mode) to be preserved across exec(2) system calls.
SGI_FS_INUMBERS [Toc] [Back]
This interface is used to extract a list of valid inode
numbers from a filesystem. It is intended to be called
iteratively, to obtain the entire set of inodes. Currently
the only filesystem type supporting this operation is the XFS
filesystem. arg1 is a file descriptor either for the block
or character device containing the filesystem of interest (it
must be mounted) or for an open file in the filesystem of
interest. arg2 is a pointer to a variable of type ino64_t
containing the last inode returned, initially it should be 0.
arg3 is the size of the array of structures specified by
arg4. arg4 is the address of an array of structures, of type
xfs_inogrp_t (definition found in <sys/fs/xfs_itable.h>).
The structure has the following elements: xi_startino
(starting inode number), xi_alloccount (count of bits set in
xi_allocmask), and xi_allocmask (mask of allocated inodes in
this group). The bitmask is 64 bits long, and the least
significant bit corresponds to inode xi_startino. Each bit
Page 7
syssgi(2) syssgi(2)
is set if the corresponding inode is in use. arg5 is a
pointer to a count of returned values, filled in by the call.
A count value of 0 means that the inode table has been
exhausted.
SGI_FS_BULKSTAT [Toc] [Back]
This interface is used to extract inode information (stat
information) "in bulk" from a filesystem. It is intended to
be called iteratively, to obtain information about the entire
set of inodes in a filesystem. Currently the only filesystem
type supporting this operation is the XFS filesystem. arg1
is a file descriptor either for the block or character device
containing the filesystem of interest (it must be mounted) or
for an open file in the filesystem of interest. arg2 is a
pointer to a variable of type ino64_t containing the last
inode returned, initially it should be 0. arg3 is the size
of the array of structures specified by arg4. arg4 is the
address of an array of structures, of type xfs_bstat_t
(definition found in <sys/fs/xfs_itable.h>). Many of the
elements in the structure are the same as for the stat
structure. The structure has the following elements: bs_ino
(inode number), bs_mode (type and mode), bs_nlink (number of
links), bs_uid (user id), bs_gid (group id), bs_rdev (device
value), bs_blksize (block size of the filesystem), bs_size
(file size in bytes), bs_atime (access time), bs_mtime
(modify time), bs_ctime (inode change time), bs_blocks
(number of blocks used by the file), bs_xflags (extended
flags), bs_extsize (extent size), bs_extents (number of
extents), bs_gen (generation count), bs_projid (project id),
bs_dmevmask (DMIG event mask), bs_dmstate (DMIG state
information), and bs_aextents (attribute extent count). arg5
is a pointer to a count of returned values, filled in by the
call. A count value of 0 means that the inode table has been
exhausted.
SGI_FS_BULKSTAT_SINGLE [Toc] [Back]
This interface is a variant of the SGI_FS_BULKSTAT interface,
used to obtain information about a single inode. arg1 is a
file descriptor either for the block or character device
containing the filesystem of interest (it must be mounted) or
for an open file in the filesystem of interest. arg2 is a
pointer to a variable of type ino64_t containing the inode
number of interest. arg3 is the address of a structure, of
type xfs_bstat_t (definition found in <sys/fs/xfs_itable.h>).
An error is returned if the inode number is invalid.
SGI_XFS_FSOPERATIONS [Toc] [Back]
This interface is used to implement various filesystem
operations on XFS filesystems. There are several suboperations
implemented. See the header file
<sys/fs/xfs_fsops.h> for further information. arg1 is a file
descriptor either for the block or character device
Page 8
syssgi(2) syssgi(2)
containing the filesystem of interest (it must be mounted) or
for an open file in the filesystem of interest. arg2 is the
operation code, one of XFS_FS_GEOMETRY, XFS_FS_COUNTS,
XFS_GROWFS_DATA, XFS_GROWFS_LOG, XFS_GROWFS_RT,
XFS_FS_GOINGDOWN, XFS_FS_FREEZE, or XFS_FS_THAW. arg3 is a
pointer to the input structure, of a type determined by the
operation code; it may be null. arg4 is a pointer to the
output structure, of a type determined by the operation code;
it may be null. For XFS_FS_GEOMETRY (get filesystem mkfstime
information), the output structure is xfs_fsop_geom_t.
For XFS_FS_COUNTS (get filesystem dynamic global
information), the output structure is xfs_fsop_counts_t. The
XFS_GROWFS_... operations are used to implement the
xfs_growfs(1M) command, and are not described further. The
XFS_FS_GOINGDOWN operation is used by umount(1M) to mark a
busy filesystem as down before unmounting. The XFS_FS_FREEZE
operation is used to flush buffers then block any further I/O
to the disk. The XFS_FS_THAW operation enables resumption of
I/O to the disk following the XFS_FS_FREEZE operation. Only
the superuser may call functions that modify data or hinder
access to the filesystem (XFS_GROWFS_DATA, XFS_GROWFS_LOG,
XFS_GROWFS_RT, XFS_SET_RESBLKS, XFS_FS_GOINGDOWN,
XFS_FS_FREEZE, and XFS_FS_THAW).
SGI_PATH_TO_HANDLE [Toc] [Back]
SGI_PATH_TO_FSHANDLE
SGI_FD_TO_HANDLE
SGI_OPEN_BY_HANDLE
SGI_READLINK_BY_HANDLE
SGI_ATTR_LIST_BY_HANDLE
SGI_ATTR_MULTI_BY_HANDLE
SGI_FSSETDM_BY_HANDLE
These are all interfaces that are used to implement various
libdm functions. The only filesystem that supports these
operations is XFS. They are all subject to change and should
not be called directly by applications.
SGI_ENUMASHS [Toc] [Back]
SGI_GETARSESS
SGI_GETASMACHID
SGI_PIDSINASH
SGI_SETASMACHID
These are all interfaces that are used to implement various
libarray functions. They are all subject to change and
should not be used directly by applications.
SGI_ACL_GET [Toc] [Back]
SGI_ACL_SET
SGI_ALLOCSHARENA
SGI_BTOOLGET
SGI_BTOOLREINIT
SGI_BTOOLSIZE
Page 9
syssgi(2) syssgi(2)
SGI_CACHEFS_SYS [Toc] [Back]
SGI_CAP_GET
SGI_CAP_SET
SGI_CKPT_SYS
SGI_CONST
SGI_DBA_CONFIG
SGI_DYIELD
SGI_ELFMAP
SGI_ERROR_FORCE
SGI_EVENTCTR
SGI_FO_DUMP
SGI_FO_SWITCH
SGI_GETGRPPID
SGI_GETSESPID
SGI_GETVPID
SGI_GET_CONTEXT_INFO
SGI_GET_CONTEXT_NAME
SGI_GET_DISMISSED_EXC_CNT
SGI_GET_EVCONF
SGI_GRIO
SGI_IO_SHOW_AUX_INFO
SGI_JOINARRAYSESS
SGI_KAIO_READ
SGI_KAIO_STATS
SGI_KAIO_SUSPEND
SGI_KAIO_USERINIT
SGI_KAIO_WRITE
SGI_KTHREAD
SGI_LOCKDSYS
SGI_MAC_GET
SGI_MAC_SET
SGI_MEMPROF_CLEARALL
SGI_MEMPROF_GET
SGI_MEMPROF_START
SGI_MEMPROF_STOP
SGI_MINRSS
SGI_MODULE_INFO
SGI_NFSNOTIFY
SGI_NOFPE
SGI_NUMA_STATS_GET
SGI_NUMA_TESTS
SGI_NUMA_TUNE
SGI_NUM_MODULES
SGI_OBJ_EVICT
SGI_PART_OPERATIONS
SGI_PHYSP
SGI_PMOCTL
SGI_PRIO_QUERY_BW
SGI_PROC_ATTR_GET
SGI_PROC_ATTR_SET
SGI_READ_DANGID
SGI_RELEASE_NAME
Page 10
syssgi(2) syssgi(2)
SGI_REVOKE [Toc] [Back]
SGI_RT_TSTAMP_ADDR
SGI_RT_TSTAMP_CREATE
SGI_RT_TSTAMP_DELETE
SGI_RT_TSTAMP_EOB_MODE
SGI_RT_TSTAMP_MASK
SGI_RT_TSTAMP_START
SGI_RT_TSTAMP_STOP
SGI_RT_TSTAMP_UPDATE
SGI_RT_TSTAMP_WAIT
SGI_SBE_CLR_INFO
SGI_SBE_GET_INFO
SGI_SETVPID
SGI_SET_DISMISSED_EXC_CNT
SGI_SIGALTSTACK
SGI_SPECULATIVE_EXEC
SGI_SYMTAB
SGI_SYNCH_CACHE_HANDLER
SGI_TUNE_SET
SGI_ULI
SGI_USE_FP_BCOPY
SGI_XLV_ATTR_CURSOR
SGI_XLV_ATTR_GET
SGI_XLV_ATTR_SET
SGI_XLV_NEXT_RQST
SGI_XLV_SET_TAB
These are all interfaces that are used to implement various
system library functions. They are all subject to change and
should not be called directly by applications.
SGI_UNSUPPORTED_MAP_RESERVED_RANGE [Toc] [Back]
When arg1 is 1 the reserved range from 0x30000000 to
0x40000000 is disabled on all future calls to mmap(2) and
shmat(2) made by the process or its children. The effect
this causes is as if MAP_SGI_ANYADDR or SHM_SGI_ANYADDR were
used in all future mmap(2) and shmat(2) calls. This option
is part of the process state and is inherited across fork(2)
and exec(2) system calls. The reserved range may be reenabled
at any point with this system call by specifying a
value of 0 for arg1. See sgi_use_anyaddr(1) for more
information about the reserved range.
The following error codes may be returned by syssgi:
[EFAULT] A buffer is referenced which is not in a valid part of the
calling program's address space.
[ENODEV] Could not determine system ID for SGI_SYSID.
Page 11
syssgi(2) syssgi(2)
[ESRCH] Could not find given process for SGI_RDNAME.
[EPERM] The effective user ID is not superuser. SGI_TUNE and
SGI_IDBG require superuser privilege.
[EINVAL] For SGI_TUNE, the first argument was not valid, or the tune
structure contained invalid values. For SGI_INVENT arg1 was
neither SGI_INV_READ nor SGI_INV_SIZEOF. For SGI_SETNVRAM
arg1 is not valid nvram variable name. For SGI_GETNVRAM arg1
is not valid IRIS PROM Monitor environment variable name.
For SGI_FS_BULKSTAT_SINGLE arg2 does not refer to a valid
inode number for this filesystem.
[ENXIO] SGI_SETNVRAM is not supported.
[ENOPKG] SGI_SET_AUTOPWRON is not supported on this system.
[ENOMEM] The specified buffer was not large enough to hold the entire
list of process ids returned by the SGI_PIDSINASH function.
ftimer(1), hinv(1), mpadmin(1), sgi_use_anyaddr(1). adjtime(2),
clock_gettime(2), clock_settime(2), setitimer(2), sigaction(2),
Upon successful completion, a command dependent value (default of zero)
is returned. Otherwise, a value of -1 is returned and errno is set to
indicate the error.
PPPPaaaaggggeeee 11112222 [ Back ]
|
