|
|
|
stlicense(1) -- server access control program for X
|
|
The stlicense program is run interactively by the font administrator to give devices attached to hosts on the network, netdevs, access to typefaces. Responsibility for maintaining security rests with users root, bin, and the owners of the font directories. |
|
stload(1) -- Utility to load Scalable Type outlines
|
|
Intellifont font technology has been obsoleted on HP's X Window System. Support for it will be removed in a future release. This utility will be removed at that time. The stload utility creates scalable typeface libraries (.ifo files) from Agfa Compugraphic Font Access and Interchange Standard (CG/FAIS) data. (An FAIS library on floppy disk or CD-ROM media is the common means of distribution for ... |
|
|
stm(1m) -- Support Tools Manager
|
|
The Support Tools Manager (STM) provides three interfaces that allow a user access to an underlying toolset, consisting of information modules, firmware update tools, verifiers, diagnostics, exercisers, expert tools, and utilities: XSTM - the graphical interface (for X11-based graphics terminals) MSTM - the menu-based interface (for non-X11-based, non-graphics terminals) CSTM - the command line in... |
|
stmkdirs(1) -- Utility to build Scalable Type fonts.dir and charsets.dir files
|
|
The stmkdirs utility is used to support TrueType, Type1 and Intellifont scalable fonts. It creates the fonts.dir, and charsets.dir files used by the Font Server and Scalable Type subsystem. Intellifont scalable fonts are being obsoleted and will not be supported on a future release of the operating system. Stmkdirs supports scalable typefaces as follows: |
|
stmkfont(1) -- Scalable Typeface font compiler to create X and PCL fonts
|
|
The stmkfont utility is obsolete and will not be supported in future releases. It has been replaced by the fstobdf utility. The stmkfont utility is a bit-mapped font generator for creating X and PCL fonts from Intellifont scalable typeface data. By specifying desired font characteristics via an X Logical Font Description (XLFD) name, the user can instruct stmkfont to generate an almost limitless v... |
|
strace(1m) -- write STREAMS event trace messages to standard output
|
|
strace gets STREAMS event trace messages from STREAMS drivers and modules via the STREAMS log driver (strlog(7)), and writes these messages to standard output. By default, strace without arguments writes all STREAMS trace messages from all drivers and modules. strace with command-line arguments limits the trace messages received. The arguments, which must be specified in groups of three, are: mod ... |
|
strchg(1m) -- change or query stream configuration
|
|
The strchg and strconf commands are used to change or query the configuration of the stream associated with the user's standard input. The strchg command pushes modules on and/or pops modules off the stream. The strconf command queries the configuration of the stream. Only the superuser or owner of a STREAMS device may alter the configuration of that stream. strchg Options The strchg command uses... |
|
strclean(1m) -- remove outdated STREAMS error log files
|
|
strclean cleans the STREAMS error logger directory of log files (error.mm-mm-dd) that contain error messages sent by the STREAMS log driver, strlog(7). If the -d option is not used to specify another directory, strclean removes error log files in the /var/adm/streams directory. If the -a option is not used to specify another age, strclean removes error log files that have not been modified in thre... |
|
strconf(1m) -- change or query stream configuration
|
|
The strchg and strconf commands are used to change or query the configuration of the stream associated with the user's standard input. The strchg command pushes modules on and/or pops modules off the stream. The strconf command queries the configuration of the stream. Only the superuser or owner of a STREAMS device may alter the configuration of that stream. strchg Options The strchg command uses... |
|
strerr(1m) -- receive error messages from the STREAMS log driver
|
|
The strerr daemon receives error messages from the STREAMS log driver (strlog(7)) for addition to the STREAMS error log files (error.mm-mm-dd) in the STREAMS error logger directory (/var/adm/streams by default). When first called, strerr creates the log file error.mm-mm-dd. This is a daily log file, where mm indicates the month and dd indicates the day of the logged messages. strerr then appends e... |
|
strings(1) -- find the printable strings in an object or other binary file
|
|
strings looks for ASCII strings in a file. If no file is specified, standard input is used. A string is any sequence of four or more printing characters ending with a newline or null character. strings is useful for identifying random object files and many other things. |
|
strip(1) -- strip symbol and line number information from an object file
|
|
strip removes the symbol table and line number information from object files, including archives. Thereafter, no symbolic debugging access is available for that file; thus, this command is normally run only on production modules that have been debugged and tested. The effect is nearly identical to using the -s option of ld. |
|
strvf(1m) -- STREAMS verification tool
|
|
strvf executes a series of subcommands that verify whether or not STREAMS is currently installed and configured on your system. All output is sent to stdout. Verbose output is always sent to the logfile /var/adm/streams/strvf.log. These subcommands make sure that the STREAMS kernel daemons are running and that open(), putmsg(), getmsg(), ioctl(), and close() can be performed on /dev/echo. |
|
stty(1) -- set the options for a terminal port
|
|
stty sets or reports current settings of certain terminal I/O options for the device that is the current standard input. The command takes four forms: stty Report the settings of a system-defined set of options; stty -a Report all of current option settings; stty -g Report current settings in a form that can be used as an argument to another stty command. stty options Set terminal I/O options as d... |
|
su(1m) -- 1 -OSF DCE 1.1/HP DCE 1.8 PHSS_26394-96
|
|
|
