remove mapping(1m)                  OSF                  remove mapping(1m)




 NAME    [Toc]    [Back]
      remove mapping - Removes specified elements from the local endpoint
      map

 SYNOPSIS    [Toc]    [Back]
      rpccp remove mapping -b string-binding -i interface-identifier [-o
      object-uuid]


 OPTIONS    [Toc]    [Back]
      -b        Specifies a string representation of a binding over which
                the server can receive remote procedure calls. At least one
                binding is required.

                The value has the form of an RPC string binding, without an
                object UUID, for example:

                -b ncadg_ip_udp:63.0.2.17[5347]

                Note that depending on your system, string binding
                delimiters such as brackets ([ ]) may need to be preceded by
                an escape symbol (\) or placed within quotation marks (' '
                or `` ''). Requirements vary from system to system, and you
                must conform to the usage rules of a system.

      -i        Specifies an interface identifier to remove from the local
                endpoint map.  An interface identifier is required. Only one
                interface can be removed in a single operation.  The
                interface identifier has the following form:

                interface-uuid,major-version.minor-version

                The UUID is a hexadecimal string and the version numbers are
                decimal strings, for example:

                -i ec1eeb60-5943-11c9-a309-08002b102989,1.1

                Leading zeros in version numbers are ignored.

      -o        Defines an object UUID that further determines the endpoint
                map elements that are removed (optional).  Each remove
                mapping command accepts up to 32 -o options.

                The UUID is a hexadecimal string, for example:

                -o 3c6b8f60-5945-11c9-a236-08002b102989


 DESCRIPTION    [Toc]    [Back]
      The remove mapping command removes server address information from the
      local endpoint map.  Each element in the local endpoint map logically



 Hewlett-Packard Company            - 1 OSF DCE 1.1/HP DCE 1.8 PHSS_26394-96






 remove mapping(1m)       Open Software Foundation        remove mapping(1m)




      contains the following:


        +  Interface ID, consisting of an interface UUID and versions (major
           and minor)

        +  Binding information

        +  Object UUID (optional)

        +  Annotation (optional)


      This command requires one interface identifier (the -i option); at
      least one string binding (the -b option); and optionally, one or more
      object UUIDs (the -o option). Each instance of the command accepts
      from 1 to 32 -b options and from 0 to 32 -o options. The options work
      together to delimit the elements to be removed from the target
      endpoint map. The command removes any map element that contains the
      specified interface identifier, a specified string binding, and a
      specified object UUID (if any).

 NOTE    [Toc]    [Back]
      This command is replaced at Revision 1.1 by the dcecp command and may
      not be provided in future releases of DCE.

 EXAMPLES    [Toc]    [Back]
      The following command operates from the system prompt to remove a map
      element from the local endpoint map.  The command removes only the map
      element that contains the specified interface identifier, server
      address (specified as a string binding), and object UUID.

       rpccp remove mapping  \
       -i ec1eeb60-5943-11c9-a309-08002b102989,1.1  \
       -b ncadg_ip_udp:16.20.16.64[3424]  \
       -o 30dbeea0-fb6c-11c9-8eea-08002b0f4528



 RELATED INFORMATION    [Toc]    [Back]
      Commands: add mapping(1m), show mapping(1m), show server(1m)


 Hewlett-Packard Company            - 2 -OSF DCE 1.1/HP DCE 1.8 PHSS_26394-96