inet -- Internet protocol family
#include <sys/types.h>
#include <netinet/in.h>
The Internet protocol family is a collection of protocols layered atop
the Internet Protocol (IP) transport layer, and utilizing the Internet
address format. The Internet family provides protocol support for the
SOCK_STREAM, SOCK_DGRAM, and SOCK_RAW socket types; the SOCK_RAW interface
provides access to the IP protocol.
Internet addresses are four byte quantities, stored in network standard
format (on little endian machines, such as the alpha, amd64, i386 and
ia64 these are word and byte reversed). The include file <netinet/in.h>
defines this address as a discriminated union.
Sockets bound to the Internet protocol family utilize the following
addressing structure,
struct sockaddr_in {
uint8_t sin_len;
sa_family_t sin_family;
in_port_t sin_port;
struct in_addr sin_addr;
char sin_zero[8];
};
Sockets may be created with the local address INADDR_ANY to affect
``wildcard'' matching on incoming messages. The address in a connect(2)
or sendto(2) call may be given as INADDR_ANY to mean ``this host''. The
distinguished address INADDR_BROADCAST is allowed as a shorthand for the
broadcast address on the primary network if the first network configured
supports broadcast.
The Internet protocol family is comprised of the IP network protocol,
Internet Control Message Protocol (ICMP), Internet Group Management Protocol
(IGMP), Transmission Control Protocol (TCP), and User Datagram Protocol
(UDP). TCP is used to support the SOCK_STREAM abstraction while
UDP is used to support the SOCK_DGRAM abstraction. A raw interface to IP
is available by creating an Internet socket of type SOCK_RAW. The ICMP
message protocol is accessible from a raw socket.
The 32-bit Internet address contains both network and host parts. However,
direct examination of addresses is discouraged. For those programs
which absolutely need to break addresses into their component parts, the
following ioctl(2) commands are provided for a datagram socket in the
Internet domain; they have the same form as the SIOCIFADDR command (see
intro(4)).
SIOCSIFNETMASK Set interface network mask. The network mask defines the
network part of the address; if it contains more of the
address than the address type would indicate, then subnets
are in use.
SIOCGIFNETMASK Get interface network mask.
The current implementation of Internet protocols includes some routingtable
adaptations to provide enhanced caching of certain end-to-end
information necessary for Transaction TCP and Path MTU Discovery. The
following changes are the most significant:
1. All IP routes, except those with the RTF_CLONING flag and those to
multicast destinations, have the RTF_PRCLONING flag forcibly enabled
(they are thus said to be ``protocol cloning'').
2. When the last reference to an IP route is dropped, the route is
examined to determine if it was created by cloning such a route. If
this is the case, the RTF_PROTO3 flag is turned on, and the expiration
timer is initialized to go off in net.inet.ip.rtexpire seconds.
If such a route is re-referenced, the flag and expiration timer are
reset.
3. A kernel timeout runs once every ten minutes, or sooner if there are
soon-to-expire routes in the kernel routing table, and deletes the
expired routes.
A dynamic process is in place to modify the value of net.inet.ip.rtexpire
if the number of cached routes grows too large. If after an expiration
run there are still more than net.inet.ip.rtmaxcache unreferenced routes
remaining, the rtexpire value is multiplied by 3/4, and any routes which
have longer expiration times have those times adjusted. This process is
damped somewhat by specification of a minimum rtexpire value
(net.inet.ip.rtminexpire), and by restricting the reduction to once in a
ten-minute period.
If some external process deletes the original route from which a protocol-cloned
route was generated, the ``child route'' is deleted. (This is
actually a generic mechanism in the routing code support for protocolrequested
cloning.)
No attempt is made to manage routes which were not created by protocol
cloning; these are assumed to be static, under the management of an
external routing process, or under the management of a link layer (e.g.,
ARP for Ethernets).
Only certain types of network activity will result in the cloning of a
route using this mechanism. Specifically, those protocols (such as TCP
and UDP) which themselves cache a long-lasting reference to route for a
destination will trigger the mechanism; whereas raw IP packets, whether
locally-generated or forwarded, will not.
MIB Variables [Toc] [Back]
A number of variables are implemented in the net.inet branch of the
sysctl(3) MIB. In addition to the variables supported by the transport
protocols (for which the respective manual pages may be consulted), the
following general variables are defined:
IPCTL_FORWARDING (ip.forwarding) Boolean: enable/disable forwarding
of IP packets. Defaults to off.
IPCTL_FASTFORWARDING (ip.fastforwarding) Boolean: enable/disable the use
of fast IP forwarding code. Defaults to off. When
fast forwarding is enabled, IP packets are forwarded
directly to the appropriate network interface
with a minimal validity checking, which
greatly improves the throughput. On the other
hand, they bypass the standard procedures, such as
IP option processing and ipfirewall(4) checking.
It is not guaranteed that every packet will be
fast-forwarded.
IPCTL_SENDREDIRECTS (ip.redirect) Boolean: enable/disable sending of
ICMP redirects in response to unforwardable IP
packets. Defaults to on.
IPCTL_DEFTTL (ip.ttl) Integer: default time-to-live (``TTL'') to
use for outgoing IP packets.
IPCTL_ACCEPTSOURCEROUTE
(ip.accept_sourceroute) Boolean: enable/disable
accepting of source-routed IP packets (default
false).
IPCTL_SOURCEROUTE (ip.sourceroute) Boolean: enable/disable forwarding
of source-routed IP packets (default false).
IPCTL_RTEXPIRE (ip.rtexpire) Integer: lifetime in seconds of protocol-cloned
IP routes after the last reference
drops (default one hour). This value varies dynamically
as described above.
IPCTL_RTMINEXPIRE (ip.rtminexpire) Integer: minimum value of ip.rtexpire
(default ten seconds). This value has no
effect on user modifications, but restricts the
dynamic adaptation described above.
IPCTL_RTMAXCACHE (ip.rtmaxcache) Integer: trigger level of cached,
unreferenced, protocol-cloned routes which initiates
dynamic adaptation (default 128).
ioctl(2), socket(2), sysctl(3), icmp(4), intro(4), ip(4), ipfirewall(4),
tcp(4), ttcp(4), udp(4)
"An Introductory 4.3 BSD Interprocess Communication Tutorial", PS1, 7.
"An Advanced 4.3 BSD Interprocess Communication Tutorial", PS1, 8.
The Internet protocol support is subject to change as the Internet protocols
develop. Users should not depend on details of the current implementation,
but rather the services exported.
The inet protocol interface appeared in 4.2BSD. The ``protocol cloning''
code appeared in FreeBSD 2.1.
FreeBSD 5.2.1 February 14, 1995 FreeBSD 5.2.1 [ Back ] |
