|
|
|
addgroup(8) -- Adds a new group interactively
|
|
Security Note If you have enhanced security installed on your system, you should use the dxaccounts program to add a group. See Security and the dxaccounts(8) reference page for more information. The ... |
|
adduser(8) -- Adds a new user interactively
|
|
Security Note If you have enhanced security installed on your system, you should use the dxaccounts command to add users. See the Security manual and the dxaccounts(8) reference page for more informat... |
|
|
addvol(8) -- Adds a volume to an existing domain
|
|
A newly created domain consists of one volume which can be a disk or a logical volume. The addvol utility enables you to grow the number of volumes within an existing domain. You can add volumes immed... |
|
advfsd(8) -- Starts the AdvFS graphical user interface (GUI) daemon
|
|
The AdvFS daemon, advfsd, is a process required by the AdvFS GUI (dtadvfs). The advfsd daemon issues commands and obtains system information on behalf of the AdvFS GUI. The /usr/var/advfs/daemon/socke... |
|
advfsstat(8) -- Displays AdvFS performance statistics
|
|
The advfsstat command displays a wide selection of AdvFS performance statistics. It reports in units of one disk block (512 bytes) per interval, with the default being one second. Any number of option... |
|
advscan(8) -- Locates AdvFS volumes on disk devices
|
|
The advscan command locates AdvFS volumes (disk partitions or LSM volumes) that are in AdvFS domains. Given the AdvFS volumes, you can re-create or fix the /etc/fdmns directory of a named domain or LS... |
|
ap(8) -- Parses addresses RFC 822-style
|
|
The ap program parses addresses according to the ARPA Internet standard. It also understands many nonstandard formats. It is useful for seeing how MH will interpret an address. The ap program treats e... |
|
arp(8) -- Displays and controls Address Resolution Protocol (ARP) tables
|
|
The arp command displays or modifies the current ARP entry for the host specified by hostname. The host may be specified by name or number, using Internet dot notation. With no options, the program di... |
|
atmarp(8) -- Creates ATM Logical IP Subnet (LIS) interface,
|
|
The atmarp command creates a logical IP subnet (LIS) interface over the ATM network. You can create multiple LIS interfaces on an ATM driver. Hosts connected to ATM communicate directly to other hosts... |
|
atmconfig(8) -- Configures the ATM subsystem
|
|
The atmconfig command configures ATM networking and displays information about the ATM networks. The command only controls the base ATM modules; it does not control specific device drivers, convergenc... |
|
atmelan(8) -- Configures LAN-Emulation clients as network interfaces.
|
|
The atmelan command creates and configures LAN-Emulation Clients (LEC) as network interfaces. The first interface created appears as elan0, the second as elan1, and so on. The atmelan command can also... |
|
atmifmp(8) -- Configures the ATM subsystem for switching IP traffic only
|
|
The atmifmp command enables and disables IP switching on a Tru64 UNIX end system that has an attached ATMworks ATM adapter. The IP switching architecture is based on the Ipsilon Networks, Inc. referen... |
|
atmsetup(8) -- Configures Asynchronous Transfer Mode (ATM) adapters and services
|
|
The atmsetup command by default invokes the SysMan ATM Configuration application, which is the recommended configuration method. This application enables you to configure and run ATM on your system. S... |
|
atmsig(8) -- Allows the configuration and management of the UNI signaling module
|
|
The atmsig command configures ATM UNI signaling on the end system. It also displays state information about the signaling module, and can be used to disable and enable the ILMI and signaling. The vari... |
|
audgen(8) -- Generates an audit record
|
|
The audgen utility generates an audit record, which is placed in the auditlog. Standard audit event information, such as identification information and a timestamp, are automatically inserted. The aud... |
