NAME    [Toc]    [Back]

       volinstall  -  Sets up Logical Storage Manager (LSM) environment
 after LSM installation

SYNOPSIS    [Toc]    [Back]

       /usr/sbin/volinstall

DESCRIPTION    [Toc]    [Back]

       The volinstall script sets up LSM  special  device  files,
       and add the following lines to the /etc/inittab file:

       lsmr:s:sysinit:/sbin/lsmbstartup      -b     </dev/console
       >/dev/console   2>&1   lsm:23:wait:/sbin/lsmbstartup    -n
       </dev/console  >/dev/console 2>&1 vol:23:wait:/sbin/volreconfig
 -n </dev/console >/dev/console 2>&1

       The first line calls the /sbin/lsmbstartup  script,  which
       enables  LSM  to start automatically on system reboot. The
       second line calls the /sbin/volreconfig script, which handles
 any pending encapsulation requests.

       If  /sbin/lsmbstartup  is  not  added  to the /etc/inittab
       file, LSM must be started manually after system reboot.

                                  Note

       The volinstall script  is  automatically  invoked  by  the
       volsetup,  clu_create, and clu_add_member commands. Therefore,
 running the volinstall script to set up LSM is  usually
 not necessary.

SEE ALSO    [Toc]    [Back]

       inittab(4),   lsmbstartup(8),   volencap(8),  volintro(8),
       volsetup(8),



                                                    volinstall(8)