tms - TMSCP magnetic tape interface
For XMI/KDM on Alpha-based systems:
bus xmi0 at iop0 vector xmierror controller uq0 at xmi?
port kdm vector uqintr device tape tms0 at uq0 drive 0
For MSI Bus: only MIPS-based DECsystem 5500
bus msi0 at ibus? vector msi_isr controller dssc1 at msi0
msinode 1 device tape tms3 at dssc1 drive 3
For XMI/CI/HSC on Alpha-based systems:
bus xmi0 at iop0 vector xmierror bus ci0 at xmi? port np
vector cimna_isr controller hsc6 at ci0 cinode 6 device
tape tms3 at hsc6 drive 3
For tms devices dual ported between two controllers:
device tape tms2 at * drive 2
The TMSCP driver provides a standard tape drive interface,
as described in mtio(7). This is a driver for any controller
that adheres to the Tape Mass Storage Control Protocol
(TMSCP). The TMSCP controllers communicate with the
host through a packet-oriented protocol termed the Tape
Mass Storage Control Protocol.
Tape Support - Alpha-based systems [Toc] [Back]
TA78, TA79, TA81, TA90, TA90E, TA91
Diagnostics [Toc] [Back]
All diagnostic messages are sent to the error logger subsystem.
/dev/tape/tape?_d?
/dev/ntape/tape?_d?
mtio(7), MAKEDEV(8), uerf(8), tapex(8)
tms(7)
[ Back ] | 