*nix Documentation Project
·  Home
 +   man pages
·  Linux HOWTOs
·  FreeBSD Tips
·  *niX Forums

  man pages->OpenBSD man pages              
Title
Content
Arch
Section
 
 sqphy(4) -- Seeq 80220/80221, 80223 and 84220 10/100 Ethernet PHY driver
    The sqphy driver supports the Seeq 80220/80221, 80223 and 84220 10/100 Ethernet PHYs. The 80223 is a 3.3 volt version of the 80221. These PHYs are found on a variety of high-performance Ethernet inter...
 srandom(4) -- random data source devices
    The various random devices produce random output data with different random qualities. Entropy data is collected from system activity (like disk and network device interrupts and such), and then run t...
 ss(4) -- SCSI Scanner device
    The ss device allows an application to set scanner parameters and retrieve image data from any of the supported scanners without having to be concerned with details of its particular command set. The ...
 mvme68k/ssh(4) -- NCR 53c7xx SCSI driver
    The ssh driver provides support for NCR 53c7xx and related SCSI controller chips.
 st(4) -- SCSI tape driver
    The st driver provides support for SCSI tape drives. It allows a tape drive to be run in several different modes depending on minor numbers and supports several different ``sub-modes''. The device c...
 stderr(4) -- file descriptor files
    The files /dev/fd/0 through /dev/fd/# refer to file descriptors which can be accessed through the file system. If the file descriptor is open and the mode the file is being opened with is a subset of ...
 stdin(4) -- file descriptor files
    The files /dev/fd/0 through /dev/fd/# refer to file descriptors which can be accessed through the file system. If the file descriptor is open and the mode the file is being opened with is a subset of ...
 stdout(4) -- file descriptor files
    The files /dev/fd/0 through /dev/fd/# refer to file descriptors which can be accessed through the file system. If the file descriptor is open and the mode the file is being opened with is a subset of ...
 ste(4) -- Sundance Technologies ST201 Fast Ethernet driver
    The ste driver provides support for PCI Ethernet adapters and embedded controllers based on the Sundance Technologies ST201 PCI fast Ethernet controller chip. This includes the D-Link DFE-550TX. The S...
 stge(4) -- Sundance/Tamarack TC9021 Gigabit Ethernet driver
    The stge device driver supports the Sundance/Tamarack TC9021 Gigabit Ethernet chip. The Sundance/Tamarack TC9021 is found on the D-Link DGE-550T, and the Antares Microsystems Gigabit Ethernet board. I...
 sti(4) -- HP Standard Text Interface
    The sti was created by HP to provide uniform frame-buffer access operations for their 9000/300 and 9000/700 series of workstations. The following models are supported (though not all features or frame...
 stp(4) -- sbus PCMCIA bridge
    The stp is a pcmcia(4) bridge for sbus(4). It uses the STP4020 chipset and it is SUN part number 501-2367.
 sv(4) -- S3 SonicVibes audio device driver
    The sv driver provides support for S3 SonicVibes (S3-617) chipset-based cards. Disabling the SRS 3-D spatial feature of the chip is recommended for higher quality audio. This can be done in software b...
 svnd(4) -- Vnode Disk Driver
    The vnd driver provides a disk-like interface to a file. This is useful for a variety of applications, including swap files and building miniroot or floppy disk images. There are two variants, the tra...
 sparc/sw(4) -- NCR 5380 SCSI Weird Sun 4/100 on-board SCSI controller
    The sw is the Sun 4/100 on-board SCSI controller based on the NCR 5380 chip, found only on Sun 4/100 workstations. The sw driver is actually implemented as part of the si(4) driver.
<<  [Prev]  12  13  14  15  16  17  18  19  20  21  22  23  24  25  26  27  28  29  30  31  32  
33  34  35  36  37  38  39  40  [Next]  >>
Copyright © 2004-2005 DeniX Solutions SRL
newsletter delivery service