NAME    [Toc]    [Back]

     stge - Sundance/Tamarack TC9021 Gigabit Ethernet driver

SYNOPSIS    [Toc]    [Back]

     stge* at pci? dev ? function ?

     Configuration of PHYs or Ten-bit interfaces may also be necessary.  See
     mii(4).

DESCRIPTION    [Toc]    [Back]

     The stge device driver supports the Sundance/Tamarack TC9021
Gigabit Ethernet
 chip.

     The  Sundance/Tamarack  TC9021  is  found  on   the   D-Link
DGE-550T, and the
     Antares Microsystems Gigabit Ethernet board.  It uses an external PHY or
     an external 10-bit interface.

SEE ALSO    [Toc]    [Back]

     arp(4), eephy(4), ifmedia(4), intro(4), mii(4), netintro(4),
pci(4),
     vlan(4), hostname.if(5), ifconfig(8)

HISTORY    [Toc]    [Back]

     The stge driver first appeared in OpenBSD 3.1.

AUTHORS    [Toc]    [Back]

     The  stge  driver  was  written  by  Jason  R. Thorpe <thor[email protected]>.

BUGS    [Toc]    [Back]

     The stge driver does not support the VLAN tag  insertion/removal feature
     of  the TC9021 chip.  This is primarily because the TC9021's
VLAN do not
     have a useful programming interface.

     The stge driver does not yet support jumbo Ethernet  frames.

OpenBSD      3.6                           July      24,     2001