map3270 - database for mapping ASCII keystrokes into IBM
3270 keys
map3270
When emulating IBM-style 3270 terminals under UNIX (see
tn3270(1)), a mapping must be performed between sequences
of keys hit on a user's (ASCII) keyboard, and the keys
that are available on a 3270. For example, a 3270 has a
key labeled EEOF which erases the contents of the current
field from the location of the cursor to the end. In
order to accomplish this function, the terminal user and a
program emulating a 3270 must agree on what keys will be
typed to invoke the EEOF function.
The requirements for these sequences are:
1) that the first character of the sequence be outside of the
standard ASCII printable characters;
2) that no sequence be an initial part of another
(although
sequences may share initial parts).
The file consists of entries for various keyboards. The
first part of an entry lists the names of the keyboards
which use that entry. These names will often be the same
as in /usr/share/misc/termcap (see termcap(5)); however,
note that often the terminals from various termcap entries
will all use the same map3270 entry; for example, both 925
and 925vb (for 925 with visual bells) would probably use
the same map3270 entry. Additionally, there are occasions
when the terminal type defines a window manager, and it
will then be necessary to specify a keyboard name (via the
KEYBD environment variable) as the name of the entry.
After the names, separated by vertical bars (`|'), comes a
left brace (`{'); the definitions; and, finally, a right
brace (`}').
Each definition consists of a reserved keyword (see list
below) which identifies the 3270 function (extended as
defined below), followed by an equal sign (`='), followed
by the various ways to generate this particular function,
followed by a semi-colon (`;'). Each way is a sequence of
strings of printable ASCII characters enclosed inside single
quotes (`''); various ways (alternatives) are separated
by vertical bars (`|').
Inside the single quotes, a few characters are special. A
caret (`^') specifies that the next character is the
``control'' character of whatever the character is. So,
`^a' represents control-a, ie: hexadecimal 1 (note that
`^A' would generate the same code). To generate rubout
(DEL), one enters `^?'. To represent a control character
inside a file requires using the caret to represent a control
sequence; simply typing control-A will not work.
Note: the ctrl-caret sequence (to generate a hexadecimal
1E) is represented as `^^' (not `^').
In addition to the caret, a letter may be preceded by a
backslash (`'). Since this has little effect for most
characters, its use is usually not recommended. For the
case of a single quote (`''), the backslash prevents that
single quote from terminating the string. For the case of
a caret (`^'), the backslash prevents the caret from having
its special meaning. To have the backslash be part of
the string, it is necessary to place two backslashes
('\') in the file.
In addition, the following characters are special:
`' means an escape character;
`0 means newline;
`' means carriage return.
`
It is not necessary for each character in a string to be
enclosed within single quotes. `\E' means three
escape characters.
Comments, which may appear anywhere on a line, begin with
a hash mark (`#'), and terminate at the end of that line.
However, comments cannot begin inside a quoted string; a
hash mark inside a quoted string has no special meaning.
3270 KEYS SUPPORTED
The following is the list of 3270 key names that are supported
in this file. Note that some of the keys don't
really exist on a 3270. In particular, the developers of
this file have relied extensively on the work at the Yale
University Computer Center with their 3270 emulator which
runs in an IBM Series/1 front end. The following list
corresponds closely to the functions that the developers
of the Yale code offer in their product.
In the following list, the starred ("*") functions are not
supported by tn3270(1). An unsupported function will
cause tn3270(1) to send a (possibly visual) bell sequence
to the user's terminal.
3270 Key Name Functional description
(*)LPRT local print
DP dup character
FM field mark character
CURSEL cursor select
CENTSIGN EBCDIC cent sign
RESHOW redisplay the screen
EINP erase input
EEOF erase end of field
DELETE delete character
INSRT toggle insert mode
TAB field tab
BTAB field back tab
COLTAB column tab
COLBAK column back tab
INDENT indent one tab stop
UNDENT undent one tab stop
NL new line
HOME home the cursor
UP up cursor
DOWN down cursor
RIGHT right cursor
LEFT left cursor
SETTAB set a column tab
DELTAB delete a column tab
SETMRG set left margin
SETHOM set home position
CLRTAB clear all column tabs
(*)APLON apl on
(*)APLOFF apl off
(*)APLEND treat input as ASCII
(*)PCON Xon/Xoff on
(*)PCOFF Xon/Xoff off
DISC disconnect (suspend)
(*)INIT new terminal type
(*)ALTK alternate keyboard dvorak
FLINP flush input
ERASE erase last character
WERASE erase last word
FERASE erase field
SYNCH we are in synch with the user
RESET reset key-unlock keyboard
MASTER_RESET reset, unlock and redisplay
(*)XOFF please hold output
(*)XON please give me output
ESCAPE enter telnet command mode
WORDTAB tab to beginning of next word
WORDBACKTAB tab to beginning of current/last
word
WORDEND tab to end of current/next word
FIELDEND tab to last non-blank of current/next
unprotected (writable) field.
PA1 program attention 1
PA2 program attention 2
PA3 program attention 3
CLEAR local clear of the 3270 screen
TREQ test request
ENTER enter key
PFK1 program function key 1
PFK2 program function key 2
etc. etc.
PFK36 program function key 36
The following entry is used by tn3270(1) when unable to
locate a reasonable version in the user's environment and
in /usr/share/misc/map3270:
name { # actual name comes from TERM
variable
clear = '^z';
flinp = '^x';
enter = '^m';
delete = '^d' | '^?'; # note that '^?' is delete
(rubout)
synch = '^r';
reshow = '^v';
eeof = '^e';
tab = '^i';
btab = '^b';
nl = '^n';
left = '^h';
right = '^l';
up = '^k';
down = '^j';
einp = '^w';
reset = '^t';
xoff = '^s';
xon = '^q';
escape = '^c';
ferase = '^u';
insrt = ' ';
# program attention keys
pa1 = '^p1'; pa2 = '^p2'; pa3 = '^p3';
# program function keys
pfk1 = '1'; pfk2 = '2'; pfk3 = '3'; pfk4 = '4';
pfk5 = '5'; pfk6 = '6'; pfk7 = '7'; pfk8 = '8';
pfk9 = '9'; pfk10 = ' '; pfk11 = '-'; pfk12 = '=';
pfk13 = ''; pfk14 = '@'; pfk15 = '
pfk17 = ''; pfk18 = ''; pfk19 = ''; pfk20 = ';
pfk21 = ' pfk22 = ''; pfk23 = '_'; pfk24 = '+';
}
IBM 3270 KEY DEFINITONS FOR AN ABOVE DEFINITION [Toc] [Back] The charts below show the proper keys to emulate each 3270
function when using the default key mapping supplied with
tn3270(1) and mset(1).
Command Keys IBM 3270 Key
Default Key(s)
Enter
RETURN
Clear
control-z
Cursor Movement Keys
New Line
control-n or
Home
Tab
control-i
Back Tab
control-b
Cursor Left
control-h
Cursor Right
control-l
Cursor Up
control-k
Cursor Down
control-j or
LINE
FEED
Edit Control Keys
Delete Char
control-d or
RUB
Erase EOF
control-e
Erase Input
control-w
Insert Mode
ESC Space
End Insert
ESC Space
Program Function Keys
PF1
ESC 1
PF2
ESC 2
...
...
PF10
ESC 0
PF11
ESC -
PF12
ESC =
PF13
ESC !
PF14
ESC @
...
...
PF24
ESC +
Program Attention Keys
PA1
control-p 1
PA2
control-p 2
PA3
control-p 3
Local Control Keys
Reset After Error
control-r
Purge Input Buffer
control-x
Keyboard Unlock
control-t
Redisplay Screen
control-v
Other Keys
Erase current field
control-u
/etc/map3270
tn3270(1), mset(1), Yale ASCII Terminal Communication Sys-
tem II Program Description/Operator's Manual (IBM
SB30-1911)
Greg Minshall
Tn3270 doesn't yet understand how to process all the
functions available in map3270; when such a function is
requested tn3270 will beep at you.
The definition of "word" (for "word erase", "word tab")
should be a run-time option. Currently it is defined as
the kernel tty driver defines it (strings of non-whitespace);
more than one person would rather use the "vi" definition
(strings of specials, strings of alphanumeric).
July 31, 1991 6 [ Back ] |
