SGIKOPT(2) SGIKOPT(2)
sgikopt - retrieve kernel option strings
int sgikopt (const char *option, char *buf, int buflen);
The IRIX kernel saves most of the IRIS PROM Monitor environment variables
(option strings) for later use by the kernel as well as user programs.
sgikopt allows the user to retrieve the values of these variables. The
option argument specifies the name of the variable; the value of the
option is returned in the buffer addressed by buf. The size in bytes of
this buffer is given by buflen. The string returned by sgikopt is
guaranteed to be null-terminated, even if the length of the option value
string exceeds buflen.
The environment variables recognized by sgikopt are as follows:
bootfile The name of the file to use for autobooting.
bootmode The type of boot performed: m to enter the PROM Monitor
after clearing memory, d to enter the PROM Monitor without
clearing memory, or c to perform an autoboot using the
bootfile.
console The console to use: g for graphics console, G for
graphics console with logo, or d for serial terminal port
1.
diskless If this variable is set, the system expects to mount it's
root filesystem via NFS from a server. It may be set even
if a local disk is installed, in which case the local root
disk is ignored.
dllogin When diskless is set, this is the login name to use during
installation on a diskless machine. See cl_init(1m) for
more information.
dlserver When diskless is set, this is the hostname of the machine
from which the root filesystem will be mounted. It should
be set in standard IP address format.
gfx An variable indicating if graphics state: alive or dead.
hostname The Internet host name string.
initfile The process control initialization program if the default,
/etc/init, is overridden. See init(1M).
Page 1
SGIKOPT(2) SGIKOPT(2)
initstate The run level to override the default state present in
/etc/inittab. See inittab(4).
keybd The international keyboard type.
monitor Overrides the default monitor setting when an unrecognized
monitor is attached to an Indy system. Specifying 'h' or
'H' indicates the attached monitor supports high
resolution mode (1280x1024 @ 60Hz). Otherwise the default
resolution is low resolution (1024x768 @ 60Hz). This
variable is usable only on an Indy system and is stored in
non-volatile RAM.
netaddr The Internet network address for booting across the
Ethernet.
logocolor The color of the logo while in the standalone programs,
and the kernel textport (no window manager running) is
controlled by this variable. It is 6 hex digits, which
are the values for red, green, and blue in that order.
This is currently implemented only on the Personal Iris.
nswap The number of blocks to use in the swap partition; this
amount overrides the partition size.
pagecolor The color of the textport while in the standalone
programs, and the kernel textport (no window manager
running) is controlled by this variable. It is 6 hex
digits, which are the values for red, green, and blue in
that order. This is currently implemented only on the
Personal Iris.
root The disk that contains the root (/) file system (as it
would be named in the /dev/dsk directory).
screencolor The color of the screen background while in the standalone
programs, and the kernel textport (no window manager
running) is controlled by this variable. It is 6 hex
digits, which are the values for red, green, and blue in
that order. This is currently implemented only on the
Personal Iris.
showconfig If this variable is specified, the kernel will print out
verbose information about memory and device configuration
at boottime.
srvaddr If set, this specifies the (only) host that will be used
to resolve bootp requests. It should be set in standard
IP address format.
Page 2
SGIKOPT(2) SGIKOPT(2)
swaplo The first block to use in the swap partition; this amount
overrides the default value of 0.
sync_on_green If this value is n, the sync information is not
superimposed on the green monitor line.
tapedevice The tape device used for software installation.
Upon successful completion, sgikopt returns 0. Otherwise, sgikopt
returns -1 and sets errno to indicate the error:
[EINVAL] The given option was not found.
[EFAULT] The option or buf argument specifies an invalid address.
syssgi(2) - the SGI_GETNVRAM command provides almost the same
functionality.
SGIKOPT(2) SGIKOPT(2)
sgikopt - retrieve kernel option strings
FORTRAN SYNOPSIS
integer *4 function sgikopt (option, buf, buflen)
character * (*) option
character * (*) buf
integer *4 buflen
The IRIX kernel saves most of the IRIS PROM Monitor environment variables
(option strings) for later use by the kernel as well as user programs.
sgikopt allows the user to retrieve the values of these variables. The
option argument specifies the name of the variable; the value of the
option is returned in the buffer addressed by buf. The size in bytes of
this buffer is given by buflen. The string returned by sgikopt is
guaranteed to be null-terminated, even if the length of the option value
string exceeds buflen.
The environment variables recognized by sgikopt are as follows:
bootfile The name of the file to use for autobooting.
bootmode The type of boot performed: m to enter the PROM Monitor
after clearing memory, d to enter the PROM Monitor without
clearing memory, or c to perform an autoboot using the
bootfile.
console The console to use: g for graphics console, G for
graphics console with logo, or d for serial terminal port
1.
diskless If this variable is set, the system expects to mount it's
root filesystem via NFS from a server. It may be set even
if a local disk is installed, in which case the local root
disk is ignored.
dllogin When diskless is set, this is the login name to use during
installation on a diskless machine. See cl_init(1m) for
more information.
dlserver When diskless is set, this is the hostname of the machine
from which the root filesystem will be mounted. It should
be set in standard IP address format.
gfx An variable indicating if graphics state: alive or dead.
hostname The Internet host name string.
Page 1
SGIKOPT(2) SGIKOPT(2)
initfile The process control initialization program if the default,
/etc/init, is overridden. See init(1M).
initstate The run level to override the default state present in
/etc/inittab. See inittab(4).
keybd The international keyboard type.
monitor Overrides the default monitor setting when an unrecognized
monitor is attached to an Indy system. Specifying 'h' or
'H' indicates the attached monitor supports high
resolution mode (1280x1024 @ 60Hz). Otherwise the default
resolution is low resolution (1024x768 @ 60Hz). This
variable is usable only on an Indy system and is stored in
non-volatile RAM.
netaddr The Internet network address for booting across the
Ethernet.
logocolor The color of the logo while in the standalone programs,
and the kernel textport (no window manager running) is
controlled by this variable. It is 6 hex digits, which
are the values for red, green, and blue in that order.
This is currently implemented only on the Personal Iris.
nswap The number of blocks to use in the swap partition; this
amount overrides the partition size.
pagecolor The color of the textport while in the standalone
programs, and the kernel textport (no window manager
running) is controlled by this variable. It is 6 hex
digits, which are the values for red, green, and blue in
that order. This is currently implemented only on the
Personal Iris.
root The disk that contains the root (/) file system (as it
would be named in the /dev/dsk directory).
screencolor The color of the screen background while in the standalone
programs, and the kernel textport (no window manager
running) is controlled by this variable. It is 6 hex
digits, which are the values for red, green, and blue in
that order. This is currently implemented only on the
Personal Iris.
showconfig If this variable is specified, the kernel will print out
verbose information about memory and device configuration
at boottime.
srvaddr If set, this specifies the (only) host that will be used
to resolve bootp requests. It should be set in standard
IP address format.
Page 2
SGIKOPT(2) SGIKOPT(2)
swaplo The first block to use in the swap partition; this amount
overrides the default value of 0.
sync_on_green If this value is n, the sync information is not
superimposed on the green monitor line.
tapedevice The tape device used for software installation.
Upon successful completion, sgikopt returns 0. Otherwise, sgikopt
returns -1 and sets errno to indicate the error:
[EINVAL] The given option was not found.
[EFAULT] The option or buf argument specifies an invalid address.
syssgi(2) - the SGI_GETNVRAM command provides almost the same
functionality.
PPPPaaaaggggeeee 3333 [ Back ]
|
