gfxtopology(1G)						       gfxtopology(1G)

NAME    [Toc]    [Back]

     gfxtopology - graphics topology information

SYNOPSIS    [Toc]    [Back]

     /usr/gfx/gfxtopology

DESCRIPTION    [Toc]    [Back]

     The gfxtopology command extracts information about	the graphics pipes,
     keyboards,	and mice attached to the system	from the hardware graph	and
     /etc/ioconfig.conf.  This information is then displayed to	relate the
     physical location of the devices to the logical configuration from
     ioconfig.conf.

     The first section of the gfxtopology output describes the brick that the
     G brick is	attached to, as	well as	the information	for the	GE board of
     that pipe.

     The second	section	describes the physical location	of the mouse and
     keyboard corresponding to the listed /hw/input directory.

EXAMPLE    [Toc]    [Back]

     The following output from gfxtopology that	has 6 pipes attached, and has
     8 keyboards and 5 mice attached.

     # /usr/gfx/gfxtopology

     pipe 0  g @ 001c07/I:11 GE14-4 030-1129-002 A DDR438
     pipe 1  g @ 001c10/X:10 GE16-4 030-1398-001 E KDK504
     pipe 2  g @ 011c07/I:10 GE16-4 030-1398-001 E KGF788
     pipe 3  g @ 011c10/I:10 GE16-4 030-1398-001 E KCJ540
     pipe 4  g @ 011c13/I:10 GE14-4 030-1129-002 K FSY253
     pipe 5  g @ 011c16/I:10 GE16-4 030-1398-001 E KWH011

     input   k @ 001c07/I:1/1	     m @ 001c07/I:1/2
     input1  k @ 011c07/I:1/1 *	     m @ 011c07/I:1/1 *
     input2  k @ 011c07/I:1/3	     m @ 011c07/I:1/4
     input3  k @ 011c07/I:2/1	     m @ 011c07/I:2/1
     input4  k @ 011c07/I:2/3	     m @ 011c10/I:1/1
     input5  k @ 011c07/I:2/4
     input6  k @ 011c10/I:1/1
     input7  k @ 011c10/I:1/3
     * - missing device

HARDWARE    [Toc]    [Back]

     This command only works on	Onyx2 and Onyx3000 series machines with
     InfiniteReality graphics pipes.

SEE ALSO    [Toc]    [Back]

     hwgraph(4), ioconfig(1M)


									PPPPaaaaggggeeee 1111