ADDZONE(1M)      K-Talk by	Xinet (10/14/99	10.1)	   ADDZONE(1M)



     NAME    [Toc]    [Back]
	  /usr/etc/appletalk/addzone - add a zone to a specific
	  interface

     SYNOPSIS    [Toc]    [Back]
	  addzone interface zone [ zone	] [ zone ] [...]

     DESCRIPTION    [Toc]    [Back]
	  Addzone uses the AppleTalk Zone Information Protocol to add
	  a zone to the	network	attached to a specific interface.  If
	  the zone never appears, it is	a sign that the	nbpd(1m)
	  daemon is malfunctioning.  Adding a zone to the loopback
	  (lo0)	adds it	to the local pseudo-net.  If other routers are
	  present on the same network, it is important that each have
	  the same list	of zones.  This	is most	easily accomplished by
	  designating a	``seed'' router	and allowing the other routers
	  to obtain their zone lists from it.  K-Talk will attempt to
	  obtain a zone	list from other	routers	on the net as well as
	  adding those provided	through	addzone.


     DIAGNOSTICS    [Toc]    [Back]
	  Can't	add zones to a Phase 1 network	Phase 1	networks have
						only one zone, so
						additional zones can
						not be specified.

     SEE ALSO    [Toc]    [Back]
	  nbpd(1m), myzone(1), getzones(1)


























     Page 1					    (printed 5/15/100)