|
|
|
PPP.KEYS(4) -- PPP encryption keys file format
|
|
The keys file named in the gw-crypt option on the pppd command line contains key values used by HP PPP's implementation of link-level encryption. Before transmission, packets with source and destination addresses matching the endpoints on a keys file line are encrypted using DES with the key specified on that keys file line. Upon reception, packets with source and destination addresses matching t... |
|
ppp.systems(4) -- PPP neighboring systems description file format
|
|
The file /etc/ppp/Systems describes how to connect with neighboring systems via PPP. |
|
|
ppp.Systems(4) -- PPP neighboring systems description file format
|
|
The file /etc/ppp/Systems describes how to connect with neighboring systems via PPP. |
|
PPP.SYSTEMS(4) -- PPP neighboring systems description file format
|
|
The file /etc/ppp/Systems describes how to connect with neighboring systems via PPP. |
|
pppoec.conf(4) -- PPPoE (Point to Point Protocol over Ethernet) client configuration file
|
|
pppoec.conf is the configuration file for the pppoec daemon. This file is read by pppoec to initialize the client. The default file is /etc/ppp/pppoec.conf. Note that, you cannot run pppoec without this configuration file. Each entry in the pppoec.conf file is separated by a new line. Blank lines and lines that begin with # are ignored. |
|
pppoerd.conf(4) -- PPPoE (Point to Point Protocol over Ethernet) relay configuration file
|
|
pppoerd.conf is the configuration file for the pppoerd daemon. This file is read by pppoerd to initailize the relay. The default file is /etc/ppp/pppoerd.conf. Note that, you cannot run pppoerd without this configuration file. Each entry in the pppoerd.conf file is separated by a new line. Blank lines and lines that begin with # are ignored. |
|
pppoesd.conf(4) -- PPPoE (Point to Point Protocol over Ethernet) server configuration file
|
|
pppoesd.conf is the configuration file for the pppoesd daemon. This file is read by pppoesd to initialize the server. The default file is /etc/ppp/pppoesd.conf. You can use this file to set parameters for each network interface used by pppoesd during PPPoE sessions. Each entry in the pppoesd.conf file is of the following format: parameter=value Each entry in the configuration file is separated by ... |
|
privgrp(4) -- format of privileged values
|
|
setprivgrp() sets a mask of privileges, and getprivgrp(2) returns an array of structures giving privileged group assignments on a pergroup-ID basis (see getprivgrp(2)). setprivgrp() associates a kernel capability with a group ID. This allows subletting of superuser-like privileges to members of a particular group or groups. The constants and structures needed for these system calls are defined in ... |
|
profile(4) -- set up user's environment at login time
|
|
If the file /etc/profile exists, it is executed by the shell for every user who logs in. The file /etc/profile should be set up to do only those things that are desirable for every user on the system, or to set reasonable defaults. If a user's login (home) directory contains a file named .profile, that file is executed (via the shell's exec .profile) before the session begins. .profile files are... |
|
proto(4) -- prototype job file for at(1)
|
|
When a job is submitted to at or batch, the job is constructed as a POSIX shell script (see at(1)). The job file is created in /var/spool/cron/atjobs as follows: + at creates a header describing the job as an at job or a batch job. at jobs submitted to all queues other than queue a are listed as batch jobs. The header is: : at job for an at job, or : batch job for a batch job. + A set of POSIX she... |
|
protocols(4) -- protocol name data base
|
|
This file associates protocol numbers with official protocol names and aliases. This allows the user to refer to a protocol by a symbolic name instead of a number. For each protocol a single line should be present with the following information: These mappings are defined in RFC 1700 Assigned Numbers. Aliases are other names under which... |
|
prpwd(4) -- protected password authentication database files used for trusted systems
|
|
An authentication profile is maintained for each user on the system. A user profile is kept in a protected password database file that is accessible only to the System Administrator. The protected password database files contain among other things the encrypted password for the user account. On a trusted system, the passwords are hidden from normal users. The protected password database files do n... |
|
publickey(4) -- public key database
|
|
/etc/publickey is a local public key database that is used for secure RPC. The /etc/publickey file can be used in conjunction with or instead of other publickey databases, including the NIS publickey map and the NIS+ publickey map. Each entry in the database consists of a network user name (which may refer to either a user or a hostname), followed by the user's public key (in hex notation), a col... |
|
queuedefs(4) -- queue description file for at, batch, and crontab
|
|
The queuedefs file describes the characteristics of the queues managed by cron (see cron(1M)). Each non-comment line in this file describes one queue. The format of the lines are as follows: q.[.[njobj][j][nicen][n][nwaitw] The fields in this line are: w] The fields in this line are: q The name of the queue, such that a is the default queue for jobs started by at (see at(1)), b is the queue for jo... |
|
rc.config(4) -- files containing system configuration information
|
|
The system configuration used at startup is contained in files within the directory /etc/rc.config.d. The file /etc/rc.config sources all of the files within /etc/rc.config.d and /etc/TIMEZONE and exports their contents to the environment. /etc/rc.config The file /etc/rc.config is a script that sources all of the /etc/rc.config.d/* scripts, and also sources /etc/TIMEZONE. To read the configuration... |
