timeslice(5)                                                   timeslice(5)
                          Tunable Kernel Parameters



 NAME    [Toc]    [Back]
      timeslice - scheduling interval in clock ticks per second

 VALUES    [Toc]    [Back]
    Failsafe
      (HZ/10)

      Where HZ defines the number of clock ticks per second for which the
      system is configured.

    Default    [Toc]    [Back]
      (HZ/10)

      Where HZ is equal to 100.

    Allowed values    [Toc]    [Back]
      Any value in the range of -1 to 2147483647 is allowed.

      A value of -1 indicates no timeslice based scheduling preemption, and
      threads will continue to run until they voluntarily switch out or
      higher priority threads preempt them.

    Recommended values    [Toc]    [Back]
      Use the default value in normal cases.  In special cases where quicker
      round robin scheduling is required, a value of 1 may be used.
      However, a change in value may have a direct impact on system
      performance.  Customers must evaluate performance impact in their
      workload environment before changing the value on production systems.

 DESCRIPTION    [Toc]    [Back]
      The timeslice tunable defines the scheduling time interval that a
      thread may execute on a processor before the kernel scheduler will
      context switch out the thread for other same priority threads to run.
      When a thread starts executing on a processor, the thread is set up to
      run for the number of ticks in the timeslice tunable.  On every clock
      interrupt that a thread is found executing, the time quantum balance
      for the thread is decremented, and when the balance reaches zero, the
      thread is context switched out.

      The timeslice value controls one method of user preemption that the
      operating system implements.  A larger value will reduce preemption of
      running threads; however, there are other reasons for user preemption
      of threads, and the timeslice tunable has no control there.

      A change in the timeslice value may have direct impact on system
      throughput and response times.  A very small value may result in too
      many context switches, and a very large value may result in the
      starvation of runnable threads.

    Who Is Expected to Change This Tunable?
      Anyone.



 Hewlett-Packard Company            - 1 -      HP-UX 11i Version 2: Sep 2004






 timeslice(5)                                                   timeslice(5)
                          Tunable Kernel Parameters



    Restrictions on Changing    [Toc]    [Back]
      Changes to this tunable take effect at the next reboot.

    When Should the Value of This Tunable Be Raised?
      Since the timeslice tunable is globally applicable to all threads
      (except sched_fifo) in the system, irrespective of their scheduling
      policies and priorities.  Any increase in value of this tunable will
      give equal time quantum boost to all threads.

      If the system has too many context switches due to preemptions, caused
      by higher priority threads, you can raise the value to provide more
      time for lower priority threads to execute when they get scheduled,
      because higher priority threads will preempt the lower priority
      threads when they become runnable.

    What Are the Side Effects of Raising the Value?
      Raising the value of the timeslice tunable may cause starvation of
      some threads, as they have to wait longer for their turn to execute.
      This may cause performance throughput issues.

    When Should the Value of This Tunable Be Lowered?
      The timeslice tunable value should be lowered if better turnaround in
      response time is required at the cost of additional context switches.
      When the system does not have too many compute intensive applications,
      threads will block and preempt much more frequently without utilizing
      their complete time quantum.

    What Are the Side Effects of Lowering the Value?
      The lowering of the timeslice tunable will result in many more context
      switches which will increase the time spent in SYSTEM space and less
      time spent in USER space.  Also, the applications that are compute
      intensive will suffer performance degradation.

    What Other Tunable Values Should Be Changed at the Same Time?
      None.

 WARNINGS    [Toc]    [Back]
      All HP-UX kernel tunable parameters are release specific.  This
      parameter may be removed or have its meaning changed in future
      releases of HP-UX.

      Installation of optional kernel software, from HP or other vendors,
      may cause changes to tunable parameter values.  After installation,
      some tunable parameters may no longer be at the default or recommended
      values.  For information about the effects of installation on tunable
      values, consult the documentation for the kernel software being
      installed. For information about optional kernel software that was
      factory installed on your system, see HP-UX Release Notes at
      http://docs.hp.com.





 Hewlett-Packard Company            - 2 -      HP-UX 11i Version 2: Sep 2004






 timeslice(5)                                                   timeslice(5)
                          Tunable Kernel Parameters



 AUTHOR    [Toc]    [Back]
      timeslice was developed by HP.


 Hewlett-Packard Company            - 3 -      HP-UX 11i Version 2: Sep 2004