|
|
|
i386/scd(4) -- Sony CDU31/33 CD-ROM driver
|
|
The scd driver provides a data interface to the Sony CDU31 and CDU33A CDROM drives. The drive must be hooked to a Sony proprietary interface card or a compatible clone. |
|
screen(4) -- pc display interface
|
|
Access to the virtual consoles are obtained through the device files /dev/ttyv0 - /dev/ttyvb. Each of these files correspond to a separate virtual console. All virtual console devices can be open at o... |
|
|
screensaver(4) -- splash screen / screen saver interface
|
|
The splash pseudo device driver adds support for the splash screen and screen savers to the kernel. This driver is required if the splash bitmap image is to be loaded or any screen saver is to be used... |
|
scsi(4) -- CAM SCSI subsystem
|
|
The CAM SCSI subsystem provides a uniform and modular system for the implementation of drivers to control various SCSI devices, and to utilize different SCSI host adapters through host adapter drivers... |
|
SCSI(4) -- CAM SCSI subsystem
|
|
The CAM SCSI subsystem provides a uniform and modular system for the implementation of drivers to control various SCSI devices, and to utilize different SCSI host adapters through host adapter drivers... |
|
sd(4) -- SCSI disk driver
|
|
The sd driver has been replaced by the da(4) driver. |
|
sem(4) -- POSIX semaphores
|
|
The sem facility provides system calls used by the standard C library (libc) to implement POSIX semaphores. It is available both as a kernel option for static inclusion and as a dynamic kernel module. |
|
ses(4) -- SCSI Environmental Services driver
|
|
The ses driver provides support for all SCSI devices of the environmental services class that are attached to the system through a supported SCSI Host Adapter, as well as emulated support for SAF-TE (... |
|
sf(4) -- Adaptec AIC-6915 "Starfire" PCI fast ethernet adapter driver
|
|
The sf driver provides support for Adaptec Duralink fast ethernet adapters based on the Adaptec AIC-6915 "Starfire" chipset. This includes the following: +o ANA-62011 64-bit single port 10/100baseTX... |
|
si(4) -- driver for Specialix International SI/XIO or SX intelligent serial card
|
|
The Specialix SI/XIO and SX hardware makes up an 8 to 32 port RS-232 serial multiplexor. The system uses two components: A "Host adapter", which is plugged into an ISA, EISA or PCI slot and provides... |
|
sio(4) -- fast interrupt driven asynchronous serial communications interface
|
|
The sio driver provides support for NS8250-, NS16450-, NS16550 and NS16550A-based EIA RS-232C (CCITT V.24) communications interfaces. The NS8250 and NS16450 have single character buffers, the NS16550A... |
|
sis(4) -- SiS 900, SiS 7016 and NS DP83815 Fast Ethernet device driver
|
|
The sis driver provides support for PCI Ethernet adapters and embedded controllers based on the Silicon Integrated Systems SiS 900 and SiS 7016 Fast Ethernet controller chips, including: +o @Nifty FNE... |
|
sk(4) -- SysKonnect SK-984x and SK-982x PCI gigabit ethernet adapter driver
|
|
The sk driver provides support for the SysKonnect SK-984x and SK-982x series PCI gigabit ethernet adapters, including the following: +o 3COM 3C940 single port, 1000baseT adapter +o Linksys EG1032 sing... |
|
skey(4) -- One-time Passwords In Everything
|
|
OPIE is a package derived from the Bellcore S/Key Version 1 distribution that helps to secure a system against replay attacks (see below). It does so using a secure hash function and a challenge/respo... |
|
sl(4) -- slip network interface
|
|
The sl interface allows serial lines to be used as network interfaces using the slip protocol. The sl interface can use Van Jacobson TCP header compression and ICMP filtering. This is arranged by usin... |
