signal SIGADDSET, SIGDELSET, SETEMPTYSET, SIGFILLSET, SIGISMEMBER,
SIGISEMPTY, SIGNOTEMPTY, SIGSETEQ, SIGSETNEQ, SIGSETOR, SIGSETAND,
SIGSETNAND, SIGSETCANTMASK, SIG_STOPSIGMASK, SIG_CONTSIGMASK, SIGPENDING,
CURSIG, execsigs, issignal, killproc, pgsigio, postsig, sigexit, siginit,
signotify, trapsignal -- kernel signal functions
#include <sys/param.h>
#include <sys/proc.h>
#include <sys/signalvar.h>
void
SIGADDSET(sigset_t set, int signo);
void
SIGDELSET(sigset_t set, int signo);
void
SIGEMPTYSET(sigset_t set);
void
SIGFILLSET(sigset_t set);
int
SIGISMEMBER(sigset_t set, int signo);
int
SIGISEMPTY(sigset_t set);
int
SIGNOTEMPTY(sigset_t set);
int
SIGSETEQ(sigset_t set1, sigset_t set2);
int
SIGSETNEQ(sigset_t set1, sigset_t set2);
void
SIGSETOR(sigset_t set1, sigset_t set2);
void
SIGSETAND(sigset_t set1, sigset_t set2);
void
SIGSETNAND(sigset_t set1, sigset_t set2);
void
SIG_CANTMASK(sigset_t set);
void
SIG_STOPSIGMASK(sigset_t set);
void
SIG_CONTSIGMASK(sigset_t set);
int
SIGPENDING(struct proc *p);
int
CURSIG(struct proc *p);
void
execsigs(struct proc *p);
int
issignal(struct proc *p);
void
killproc(struct proc *p, char *why);
void
pgsigio(struct sigio **sigiop, int sig, int checkctty);
void
postsig(int sig);
void
sigexit(struct thread *td, int signum);
void
siginit(struct proc *p);
void
signotify(struct proc *p);
void
trapsignal(struct proc *p, int sig, u_long code);
The SIGADDSET() macro adds signo to set. No effort is made to ensure
that signo is a valid signal number.
The SIGDELSET() macro removes signo from set. No effort is made to
ensure that signo is a valid signal number.
The SIGEMPTYSET() macro clears all signals in set.
The SIGFILLSET() macro sets all signals in set.
The SIGISMEMBER() macro determines if signo is set in set.
The SIGISEMPTY() macro determines if set does not have any signals set.
The SIGNOTEMPTY() macro determines if set has any signals set.
The SIGSETEQ() macro determines if two signal sets are equal; that is,
the same signals are set in both.
The SIGSETNEQ() macro determines if two signal sets differ; that is, if
any signal set in one is not set in the other.
The SIGSETOR() macro ors the signals set in set2 into set1.
The SIGSETAND() macro ands the signals set in set2 into set1.
The SIGSETNAND() macro nands the signals set in set2 into set1.
The SIG_CANTMASK() macro clears the SIGKILL and SIGSTOP signals from set.
These two signals cannot be blocked or caught and SIG_CANTMASK() is used
in code where signals are manipulated to ensure this policy is enforced.
The SIG_STOPSIGMASK() macro clears the SIGSTOP, SIGTSTP, SIGTTIN, and
SIGTTOU signals from set. SIG_STOPSIGMASK() is used to clear stop signals
when a process is waiting for a child to exit or exec, and when a
process is continuing after having been suspended.
The SIG_CONTSIGMASK() macro clears the SIGCONT signal from set.
SIG_CONTSIGMASK() is call when a process is stopped.
The SIGPENDING() macro determines if the given process has any pending
signals that are not masked. If the process has a pending signal and the
process is currently being traced SIGPENDING() will return true even if
the signal is masked.
The CURSIG() function returns the signal number that should be delivered
to p. If there are no signals pending zero is returned.
The execsigs() function resets the signal set and signal stack of a
process in preparation for an exec(2). The lock for p must be held
before execsigs() is called.
The issignal() function determines if there are any pending signals for p
that should be caught, cause p to terminate or interrupt the current system
call. If p is currently being traced, ignored signals will be handled
and p is always stopped. Stop signals are handled and cleared right
away by issignal(), unless the process is a member of an orphaned process
group and the stop signal originated from a tty. sched_lock may be
acquired and released and if Giant is held it may be released and reacquired.
p must be locked before issignal() is called and may be released
and reacquired during the call; as well, p's parent's lock may be
acquired and released. Default signal actions are not taken for system
processes and init.
The killproc() function delivers SIGKILL to p. why is logged as the reason
"why" the process was killed.
The pgsigio() function sends the signal sig to the process or process
group sigiop->sio_pgid. If checkctty is non-zero the signal is only
delivered to processes in the process group that have a controlling terminal.
If sigiop->sio_pgid is for a process (> 0), the lock for
sigiop->sio_proc is acquired and released. If sigiop->sio_pgid is for a
process group (< 0), the process group lock for sigiop->sio_pgrp is
acquired and released. sigio_lock is acquired and released.
The postsig() function handles the actual delivery of the signal sig.
postsig() is called from ast() after the kernel has been notified that a
signal should be delivered (via a call to signotify(), which causes the
flag PS_NEEDSIGCHK to be set). The lock for process that owns curthread
must be held before postsig() is called, and the current process cannot
be 0.
The sigexit() function causes the process that owns td to exit with a
return value of signal number sig. If required, the process will dump
core. The lock for the process that owns td must be held before
sigexit() is called, and Giant will be acquired if it is not already
held.
The siginit() function is called during system initialization to cause
every signal with a default property of SA_IGNORE (except SIGCONT) to be
ignored by p. The process lock for p is acquired and released by
siginit(). The only process that siginit() is ever called for is proc0.
The signotify() function flags that there are unmasked signals pending
that ast() should handle. The lock for p must be held before signotify()
is called, and sched_lock is acquired and released.
The trapsignal() function sends a signal that is the result of a trap to
p. If the process is not being traced and the signal can be delivered
immediately trapsignal() will deliver it directly; otherwise,
trapsignal() will call psignal(9) to cause the signal to be delivered.
Giant is acquired and released, as is the lock for p.
The SIGISMEMBER(), SIGISEMPTY(), SIGNOTEMPTY(), SIGSETEQ(), SIGSETNEQ(),
and SIGPENDING() macros all return non-zero (true) if the condition they
are checking is found to be true; otherwise, zero (false) is returned.
CURSIG() returns either a valid signal number or zero.
issignal() returns either a valid signal number or zero.
gsignal(9), pgsignal(9), psignal(9)
This man page was written by Chad David <[email protected]>.
FreeBSD 5.2.1 June 9, 2002 FreeBSD 5.2.1 [ Back ] |
