buf -- kernel buffer I/O scheme used in FreeBSD VM system
The kernel implements a KVM abstraction of the buffer cache which allows
it to map potentially disparate vm_page's into contiguous KVM for use by
(mainly file system) devices and device I/O. This abstraction supports
block sizes from DEV_BSIZE (usually 512) to upwards of several pages or
more. It also supports a relatively primitive byte-granular valid range
and dirty range currently hardcoded for use by NFS. The code implementing
the VM Buffer abstraction is mostly concentrated in
/usr/src/sys/kern/vfs_bio.c.
One of the most important things to remember when dealing with buffer
pointers (struct buf) is that the underlying pages are mapped directly
from the buffer cache. No data copying occurs in the scheme proper,
though some file systems such as UFS do have to copy a little when dealing
with file fragments. The second most important thing to remember is
that due to the underlying page mapping, the b_data base pointer in a buf
is always *page* aligned, not *block* aligned. When you have a VM buffer
representing some b_offset and b_size, the actual start of the buffer is
(b_data + (b_offset & PAGE_MASK)) and not just b_data. Finally, the VM
system's core buffer cache supports valid and dirty bits (m->valid,
m->dirty) for pages in DEV_BSIZE chunks. Thus a platform with a hardware
page size of 4096 bytes has 8 valid and 8 dirty bits. These bits are
generally set and cleared in groups based on the device block size of the
device backing the page. Complete page's worth are often referred to
using the VM_PAGE_BITS_ALL bitmask (i.e. 0xFF if the hardware page size
is 4096).
VM buffers also keep track of a byte-granular dirty range and valid
range. This feature is normally only used by the NFS subsystem. I'm not
sure why it is used at all, actually, since we have DEV_BSIZE valid/dirty
granularity within the VM buffer. If a buffer dirty operation creates a
'hole', the dirty range will extend to cover the hole. If a buffer validation
operation creates a 'hole' the byte-granular valid range is left
alone and will not take into account the new extension. Thus the whole
byte-granular abstraction is considered a bad hack and it would be nice
if we could get rid of it completely.
A VM buffer is capable of mapping the underlying VM cache pages into KVM
in order to allow the kernel to directly manipulate the data associated
with the (vnode,b_offset,b_size). The kernel typically unmaps VM buffers
the moment they are no longer needed but often keeps the 'struct buf'
structure instantiated and even bp->b_pages array instantiated despite
having unmapped them from KVM. If a page making up a VM buffer is about
to undergo I/O, the system typically unmaps it from KVM and replaces the
page in the b_pages[] array with a place-marker called bogus_page. The
place-marker forces any kernel subsystems referencing the associated
struct buf to re-lookup the associated page. I believe the place-marker
hack is used to allow sophisticated devices such as file system devices
to remap underlying pages in order to deal with, for example, re-mapping
a file fragment into a file block.
VM buffers are used to track I/O operations within the kernel. Unfortunately,
the I/O implementation is also somewhat of a hack because the
kernel wants to clear the dirty bit on the underlying pages the moment it
queues the I/O to the VFS device, not when the physical I/O is actually
initiated. This can create confusion within file system devices that use
delayed-writes because you wind up with pages marked clean that are actually
still dirty. If not treated carefully, these pages could be thrown
away! Indeed, a number of serious bugs related to this hack were not
fixed until the 2.2.8/3.0 release. The kernel uses an instantiated VM
buffer (i.e. struct buf) to place-mark pages in this special state. The
buffer is typically flagged B_DELWRI. When a device no longer needs a
buffer it typically flags it as B_RELBUF. Due to the underlying pages
being marked clean, the B_DELWRI|B_RELBUF combination must be interpreted
to mean that the buffer is still actually dirty and must be written to
its backing store before it can actually be released. In the case where
B_DELWRI is not set, the underlying dirty pages are still properly marked
as dirty and the buffer can be completely freed without losing that
clean/dirty state information. ( XXX do we have to check other flags in
regards to this situation ??? ).
The kernel reserves a portion of its KVM space to hold VM Buffer's data
maps. Even though this is virtual space (since the buffers are mapped
from the buffer cache), we cannot make it arbitrarily large because
instantiated VM Buffers (struct buf's) prevent their underlying pages in
the buffer cache from being freed. This can complicate the life of the
paging system.
The buf manual page was originally written by Matthew Dillon and first
appeared in FreeBSD 3.1, December 1998.
FreeBSD 5.2.1 December 22, 1998 FreeBSD 5.2.1 [ Back ] |
