NAME    [Toc]    [Back]

     hccontrol -- HCI configuration utility

SYNOPSIS    [Toc]    [Back]

     hccontrol [-hN] -n HCI_node_name command [parameters ...]

DESCRIPTION    [Toc]    [Back]

     The hccontrol utility connects to the specified Netgraph node of type HCI
     and attempts to send specified command to the HCI Netgraph node or to the
     associated Bluetooth device.  The hccontrol utility will print results to
     the standard output and error messages to the standard error.

     The options are as follows:

     -h      Display usage message and exit.

     -N      Show Bluetooth addresses as numbers.  Normally hccontrol attempts
	     to resolve Bluetooth addresses, and display them symbolically.

     -n HCI_node_name
	     Connect to the specified HCI Netgraph node.

     command
	     One of the supported commands (see below).  Special command help
	     can be used to obtain the list of all supported commands.	To get
	     more information about specific command use help command.

     parameters
	     One or more optional space separated command parameters.

COMMANDS    [Toc]    [Back]

     The currently supported HCI commands in hccontrol are:

	   Inquiry
	   Create_Connection
	   Disconnect
	   Add_SCO_Connection
	   Change_Connection_Packet_Type
	   Remote_Name_Request
	   Read_Remote_Supported_Features
	   Read_Remote_Version_Information
	   Read_Clock_Offset
	   Role_Discovery
	   Switch_Role
	   Read_Link_Policy_Settings
	   Write_Link_Policy_Settings
	   Reset
	   Read_Pin_Type
	   Write_Pin_Type
	   Read_Stored_Link_Key
	   Write_Stored_Link_Key
	   Delete_Stored_Link_Key
	   Change_Local_Name
	   Read_Local_Name
	   Read_Connection_Accept_Timeout
	   Write_Connection_Accept_Timeout
	   Read_Page_Timeout
	   Write_Page_Timeout
	   Read_Scan_Enable
	   Write_Scan_Enable
	   Read_Page_Scan_Activity
	   Write_Page_Scan_Activity
	   Read_Inquiry_Scan_Activity
	   Write_Inquiry_Scan_Activity
	   Read_Authentication_Enable
	   Write_Authentication_Enable
	   Read_Encryption_Mode
	   Write_Encryption_Mode
	   Read_Class_Of_Device
	   Write_Class_Of_Device
	   Read_Voice_Settings
	   Write_Voice_Settings
	   Read_Number_Broadcast_Retransmissions
	   Write_Number_Broadcast_Retransmissions
	   Read_Hold_Mode_Activity
	   Write_Hold_Mode_Activity
	   Read_SCO_Flow_Control_Enable
	   Write_SCO_Flow_Control_Enable
	   Read_Link_Supervision_Timeout
	   Write_Link_Supervision_Timeout
	   Read_Page_Scan_Period_Mode
	   Write_Page_Scan_Period_Mode
	   Read_Page_Scan_Mode
	   Write_Page_Scan_Mode
	   Read_Local_Version_Information
	   Read_Local_Supported_Features
	   Read_Buffer_Size
	   Read_Country_Code
	   Read_BD_ADDR
	   Read_Failed_Contact_Counter
	   Reset_Failed_Contact_Counter
	   Get_Link_Quality
	   Read_RSSI

     The currently supported node commands in hccontrol are:

	   Read_Node_State
	   Initialize
	   Read_Debug_Level
	   Write_Debug_Level
	   Read_Node_Buffer_Size
	   Read_Node_BD_ADDR
	   Read_Node_Features
	   Read_Node_Stat
	   Reset_Node_Stat
	   Flush_Neighbor_Cache
	   Read_Neighbor_Cache
	   Read_Connection_List
	   Read_Node_Link_Policy_Settings_Mask
	   Write_Node_Link_Policy_Settings_Mask
	   Read_Node_Packet_Mask
	   Write_Node_Packet_Mask
	   Read_Node_Role_Switch
	   Write_Node_Role_Switch

BUGS    [Toc]    [Back]

     Most likely.  Please report if found.

DIAGNOSTICS    [Toc]    [Back]

     The hccontrol utility exits 0 on success, and >0 if an error occurs.

SEE ALSO    [Toc]    [Back]

     netgraph(3), netgraph(4), ng_hci(4), hcseriald(8)

AUTHORS    [Toc]    [Back]

     Maksim Yevmenkin <[email protected]>


FreeBSD 5.2.1			 June 14, 2002			 FreeBSD 5.2.1