remote -- remote host description file
The systems known by tip(1) and their attributes are stored in an ASCII
file which is structured somewhat like the termcap(5) file. Each line in
the file provides a description for a single system. Fields are separated
by a colon (``:''). Lines ending in a \ character with an immediately
following newline are continued on the next line.
The first entry is the name(s) of the host system. If there is more than
one name for a system, the names are separated by vertical bars. After
the name of the system comes the fields of the description. A field name
followed by an `=' sign indicates a string value. A field name followed
by a `#' sign indicates a numeric value.
Entries named ``tip*'' and ``cu*'' are used as default entries by tip(1),
and the cu(1) interface to tip, as follows. When tip is invoked with
only a phone number, it looks for an entry of the form ``tip300'', where
300 is the data rate with which the connection is to be made. When the
cu interface is used, entries of the form ``cu300'' are used.
Capabilities are either strings (str), numbers (num), or boolean flags
(bool). A string capability is specified by capability=value; for example,
``dv=/dev/harris''. A numeric capability is specified by
capability#value; for example, ``xa#99''. A boolean capability is specified
by simply listing the capability.
at (str) Auto call unit type.
br (num) The data rate (bits per second) used for communications on
the serial port. When a modem is used, the data rate used to
communicate with the remote modem may be different than this
rate. This is a decimal number. The default rate is 9600 bits
per second.
cm (str) An initial connection message to be sent to the remote
host. For example, if a host is reached through a port selector,
this might be set to the appropriate sequence required to switch
to the host.
cu (str) Call unit if making a phone call. Default is the same as
the `dv' field.
di (str) Disconnect message sent to the host when a disconnect is
requested by the user.
du (bool) This host is on a dial-up line.
dv (str) UNIX device(s) to open to establish a connection. If this
file refers to a terminal line, tip(1) attempts to perform an
exclusive open on the device to ensure only one user at a time
has access to the port.
el (str) Characters marking an end-of-line. The default is NULL.
`~' escapes are only recognized by tip after one of the characters
in `el', or after a carriage-return.
fs (str) Frame size for transfers. The default frame size is equal
to BUFSIZ.
hd (bool) The host uses half-duplex communication, local echo should
be performed.
ie (str) Input end-of-file marks. The default is NULL.
oe (str) Output end-of-file string. The default is NULL. When tip
is transferring a file, this string is sent at end-of-file.
pa (str) The type of parity to use when sending data to the host.
This may be one of ``even'', ``odd'', ``none'', ``zero'' (always
set bit 8 to zero), ``one'' (always set bit 8 to 1). The default
is even parity.
pn (str) Telephone number(s) for this host. If the telephone number
field contains an @ sign, tip searches the file /etc/phones file
for a list of telephone numbers (see phones(5)).
tc (str) Indicates that the list of capabilities is continued in the
named description. This is used primarily to share common capability
information.
Here is a short example showing the use of the capability continuation
feature. It defines a 56k modem connection on the first serial port at
115200 bits per second, no parity using the Hayes command set with standard
line editing and end of file characters. The arpavax entry includes
everything in the UNIX-57600 entry plus the phone number for arpavax (in
this case an @ character so that it is retrieved from the environment).
UNIX-57600:\
:dv=/dev/cuaa0:el=^D^U^C^S^Q^O@:oe=^D:du:at=hayes:br#115200:pa=none:
arpavax|ax:\
:pn=\@:tc=UNIX-57600
/etc/remote The remote host description file resides in /etc.
cu(1), tip(1), phones(5)
The remote file format appeared in 4.2BSD.
Tip uses its own notion of the serial ports data rate rather than the
system default for a serial port.
FreeBSD 5.2.1 October 20, 2003 FreeBSD 5.2.1 [ Back ] |
