i4bisppp -- isdn4bsd synchronous PPP over ISDN B-channel network driver
device "i4bisppp" [count]
device sppp
The i4bisppp driver interfaces the IP subsystem of the operating system
with the isdn4bsd package so that a transport of IP packets over an ISDN
link is possible.
The driver is just a glue layer between the sppp(4) backend and the
ISDN4BSD package and needs the sppp(4) driver configured into the kernel.
The network interfaces provided by this driver are named isp<n>, where
<n> is a number between 0 and count-1 from the kernel config line.
For configuration of the i4bsppp driver, either the spppcontrol(8) utility
is used or the driver can be configured via isdnd(1) and its associated
isdnd.rc(5) file.
In case an IP packet for a remote side arrives in the driver and no connection
is established yet, the driver communicates with the isdnd(8)
daemon to establish a connection.
The driver has support for interfacing to the bpf(4) subsystem for using
tcpdump(1) with the isp interfaces.
The link0 and link1 flags given as parameters to ifconfig(8) have the
following meaning for the isp<n> devices:
link0 wait passively for connection
link1 auto-dial on output
The link0 and link1 flags are set to off by default.
See sppp(4) for a more detailed discussion of the flags.
tcpdump(1), bpf(4), sppp(4), isdnd.rc(5), isdnd(8), spppcontrol(8)
The i4bisppp device driver was written by Joerg Wunsch
<[email protected]> and then added to ISDN4BSD by Gary Jennejohn
<[email protected]>.
This manpage was written by Hellmuth Michaelis <[email protected]>.
FreeBSD 5.2.1 July 28, 2002 FreeBSD 5.2.1 [ Back ] | 