doscmd -- run a subset of real-mode DOS programs
doscmd -23AbDEfGHIMOPRrtVvXxYz -c file -d file -i port[:cnt] -o
port[:cnt] -S int -U int [cmd [args ...]]
The doscmd utility can either emulate a subset of DOS and run the single
command cmd args, or it can be used to emulate a PC and boot DOS, which
allows it to run a larger variety of DOS applications. It should be
noted that MS DOS 6.2 and higher appear to cause difficulties for doscmd.
To boot DOS, either provide the -b flag or omit the cmd argument. If -b
is specified, cmd and args are ignored.
Although doscmd only provides a subset of DOS, it is sufficient to run a
variety of programs, including, but not limited to, compilers, assemblers
and linker-loaders.
The various flags available to doscmd are:
-2 Enable debugging traces of every trap to the doscmd emulator from
the DOS program. Note that some traps are handled in the kernel
and hence will not be traced.
-3 Enable debugging of several lower level functions, such as changing
of interrupt vectors and initializing paths to logical
drives.
-A Enable tracing of all interrupts that pass into the emulator.
This is the same as using the -S option with all 256 possible
interrupt values.
-b Attempt to boot DOS rather than emulate it.
-c file
Capture all output directed at the screen into file. Note that
direct screen writes will not be captured.
-C List MS-DOS calls emulated and their return values.
-D Enable debugging of the disk and file operations.
-d file
Send the debug output to file instead of stderr.
-E Enable debugging of the exec routines.
-G Enable debugging of the video (graphics) routines.
-H Enable tracing of half implemented calls.
-I Enable tracing of all interrupts. Almost the same as -A except a
few less traces are turned on.
-i port[:cnt]
Enable tracing of all inputs requested from the io port. If cnt
is present, trace from port to port+cnt-1.
-M Enable debugging of the memory operations.
-O Direct the debugging output to stdout rather than stderr.
-o port[:cnt]
Enable tracing of all outputs requested from the io port. If cnt
is present, trace from port to port+cnt-1.
-p port[:cnt]
Map the requested io port (with optional range up to port+cnt-1)
to the real hardware I/O port(s). This will likely require root
privs to access them.
-P Enable tracing of io port calls (such as inb, outb, etc).
-R Enable debugging of the file redirect code.
-r Use the raw keyboard and display. Pressing <CTRL-ALT-DEL> will
cause doscmd to exit. This allows use of VGA graphics.
-S int Enable tracing of the interrupt int.
-t Attempt to do instruction level tracing. Some instructions confuse
the trace. Pressing <CTRL-ALT-T> attempts to toggle the
trace mode on and off.
-U int Disable tracing of the interrupt int. Useful after -A or -I.
-V Include register dumps when reporting unknown interrupts.
-v Same as -AH
-X Enable debugging of the XMS operations.
-x Open an X11 window to display output. This enables a variety
interrupts not available otherwise. This can be used with or
without -b.
-Y Enable debugging of the EMS operations.
-z Cause doscmd to pause just prior to jumping to the DOS program.
Very little use except for developing doscmd.
When starting up, doscmd attempts to read a configuration file. First
the file .doscmdrc in the current directory. If not found there, the
$HOME directory is searched. If still not found, the file /etc/doscmdrc
is used.
In the configuration file, a comment is started with the # character.
Blank lines are ignored. Non empty lines either are environment variables
or commands which configure devices. Any line which has an =
before any white space is considered to be an environment variable
assignment and is added to the DOS environment. The rest of the lines
are one of the following
boot [A: | C:]
Set the device to boot from. By default A: is first tried, if it
is defined, and if that fails, C: is tried.
assign [A-Z]: [-ro] path
Assigns the BSD/OS directory path to be assigned as the specified
drive. If the -ro flag is specified, it is a read only file system.
These assignments will not take place when booting DOS until
the /usr/libdata/doscmd/redir.com binary is run.
assign lpt[0-4]: [direct] path [timeout]
Attempt to assign the specified printer to path. If timeout is
specified then use it as the length of time for no activity (in
seconds) to indicate that the printer should be flushed. The
default is 30 seconds. The direct option should be set when path
refers to a real printer.
assign [A: | B:] [-ro] path density
assign flop[01] [-ro] path density
Assign the file path to be used as either the next available
floppy or to the specified floppy. If -ro is specified the floppy
will be read only. The density may be one of:
180 9 head 40 track single sided floppy
360 9 head 40 track double sided floppy
720 9 head 80 track double sided floppy
1200 15 head 80 track double sided floppy
1440 18 head 80 track double sided floppy
2880 36 head 80 track double sided floppy
assign [C-Z]: [-ro] path [type | cyl head sec] [fdisk_tab]
assign hard[01] [-ro] path [type | cyl head sec] [fdisk_tab]
Assign the file path to be used as either the next available hard
disk or to the specified hard disk. A disk's geometry can either
be directly specified with cyl being the number of cylinders, head
the number of heads and sec the number of sectors per track, or it
can be one of the standard types specified by type (see below).
The option fdisk_tab argument specifies file to use as the first
sector of this disk. This can be useful for inserting a false
fdisk table when path only refers to part of a disk.
assign com[1-4]: path port irq
Assign the tty or pty specified by path to be used as the specified
com port. Its base address will be emulated at port at
interrupt specified by irq. This code is lightly tested and may
not suit all needs.
portmap port [count]
Map the requested io port (with optional range up to port+count-1)
to the real hardware I/O port(s). This will likely require root
privs to access them.
setver command version
Cause doscmd, when emulating DOS, to report version as the version
number of DOS when called from the program named command. The
format of version is the same as of the MS_VERSION variable
described below.
If not already assigned, C: will be assigned to the root directory (/)
and the current directory for C: will be set to the actual current directory.
Note that this means that invocations such as:
doscmd ../foo
will not work as the C: directory will start with the current path.
Also, the following environment variables will be defined if not already
defined:
COMSPEC=C:\COMMAND.COM
PATH=C:\
PROMPT=DOS>
The PATH variable is also used to find cmd. Like DOS, first cmd.com will
be looked for and then cmd.exe.
CONFIGURATION VARIABLES [Toc] [Back] There are several variables in the .doscmdrc file which are internal to
doscmd and do not actually get inserted into the DOS environment. These
are:
MS_VERSION The value of this variable is used to determine the version
of DOS that should be reported by doscmd. Note that doscmd
will not change the way it works, just the way it reports.
By default this value is 410, which corresponds to MS DOS
version 4.1. To change it to version 3.2 (the default in
previous versions of doscmd) use the value of 320.
X11_FONT The value of this variable determines the font used in an X
window. The default font is vga, which is installed in
/usr/libdata/doscmd/fonts. Add the line `xset fp+
/usr/libdata/doscmd/fonts' to your ${HOME}/.xsession or
${HOME}/.xinitrc to let the X server find it.
The doscmd utility translates BSD/OS file names into DOS file names by
converting to all upper case and eliminating any invalid character. It
does not make any attempt to convert ASCII files into the <CR><LF> format
favored in the DOS world. Use fconv(1) (part of the ports collection) or
similar tools to convert ASCII files.
+-----------+-----------------+-------------+---------------+------------+
| Type | Cylinders | Heads | Sectors | Size |
+-----------+-----------------+-------------+---------------+------------+
| 01 | 306 | 4 | 17 | 10MB |
| 02 | 615 | 4 | 17 | 20MB |
| 03 | 615 | 6 | 17 | 30MB |
| 04 | 940 | 8 | 17 | 62MB |
| 05 | 940 | 6 | 17 | 46MB |
+-----------+-----------------+-------------+---------------+------------+
| 06 | 615 | 4 | 17 | 20MB |
| 07 | 462 | 8 | 17 | 30MB |
| 08 | 733 | 5 | 17 | 30MB |
| 09 | 900 | 15 | 17 | 112MB |
| 10 | 820 | 3 | 17 | 20MB |
+-----------+-----------------+-------------+---------------+------------+
| 11 | 855 | 5 | 17 | 35MB |
| 12 | 855 | 7 | 17 | 49MB |
| 13 | 306 | 8 | 17 | 20MB |
| 14 | 733 | 7 | 17 | 42MB |
| 15 | 976 | 15 | 17 | 121MB |
+-----------+-----------------+-------------+---------------+------------+
| 16 | 612 | 4 | 17 | 20MB |
| 17 | 977 | 5 | 17 | 40MB |
| 18 | 977 | 7 | 17 | 56MB |
| 19 | 1024 | 7 | 17 | 59MB |
| 20 | 733 | 5 | 17 | 30MB |
+-----------+-----------------+-------------+---------------+------------+
| 21 | 733 | 7 | 17 | 42MB |
| 22 | 733 | 5 | 17 | 30MB |
| 23 | 306 | 4 | 17 | 10MB |
| 24 | 925 | 7 | 17 | 53MB |
| 25 | 925 | 9 | 17 | 69MB |
+-----------+-----------------+-------------+---------------+------------+
| 26 | 754 | 7 | 17 | 43MB |
| 27 | 754 | 11 | 17 | 68MB |
| 28 | 699 | 7 | 17 | 40MB |
| 29 | 823 | 10 | 17 | 68MB |
| 30 | 918 | 7 | 17 | 53MB |
+-----------+-----------------+-------------+---------------+------------+
| 31 | 1024 | 11 | 17 | 93MB |
| 32 | 1024 | 15 | 17 | 127MB |
| 33 | 1024 | 5 | 17 | 42MB |
| 34 | 612 | 2 | 17 | 10MB |
| 35 | 1024 | 9 | 17 | 76MB |
+-----------+-----------------+-------------+---------------+------------+
| 36 | 1024 | 8 | 17 | 68MB |
| 37 | 615 | 8 | 17 | 40MB |
| 38 | 987 | 3 | 17 | 24MB |
| 39 | 987 | 7 | 17 | 57MB |
| 40 | 820 | 6 | 17 | 40MB |
+-----------+-----------------+-------------+---------------+------------+
| 41 | 977 | 5 | 17 | 40MB |
| 42 | 981 | 5 | 17 | 40MB |
| 43 | 830 | 7 | 17 | 48MB |
| 44 | 830 | 10 | 17 | 68MB |
| 45 | 917 | 15 | 17 | 114MB |
+-----------+-----------------+-------------+---------------+------------+
| 46 | 1224 | 15 | 17 | 152MB |
+-----------+-----------------+-------------+---------------+------------+
INSTALLING DOS ON A PSEUDO DISK [Toc] [Back] To install DOS on a pseudo hard disk under doscmd, do the following:
1 Create a .doscmdrc with at least the following:
assign A: /dev/fd0.1440 1440
assign A: /dev/fd0.720 720
assign hard boot_drive 80 2 2
You may need to adjust the raw files for the A: drive to match your
system. This example will cause the HD drive to be tried first and
the DD drive second.
Note that you should only use raw devices or files at this point,
do not use a cooked device! (Well, it would probably be okay for a
hard disk, but certainly not the floppy)
boot_drive should be the file name of where you want your bootable
image to be. The three numbers which follow 80 2 2 say that the
drive will have 80 cylinders, 2 heads and 2 sectors per track.
This is the smallest drive possible which still can have MS DOS 5.0
installed on it along with a config.sys and autoexec.bat file.
You might want to create a larger boot drive.
The file boot_drive must exist, so use the command touch to create
it.
2 Insert a floppy disk into the A: drive which is bootable to MS-DOS
and has the commands fdisk, format and sys on it. You should also
copy the file redir.com onto the floppy by either mounting it with
the msdos file system type or by using mtools (e.g., ``mwrite
redir.com a:'').
3 run doscmd.
4 At the > prompt type fdisk.
5 Select Create DOS partition or Logical Drive.
6 Select Create Primary DOS Partition.
7 Tell it how big to make it (Typically the whole drive. It is
pretty tiny after all.)
8 Get out of FDISK by hitting <ESC> a few times.
9 doscmd may abort, if it does, start up doscmd again.
10 At the > prompt, type format c: and follow the instructions.
11 At the > prompt type sys c:.
12 Get out of doscmd.
13 Either remove the floppy from the drive or add the line
boot C:
to your .doscmdrc.
14 You should now be running DOS off of your new disk. You will probably
want both config.sys and an autoexec.bat file. To start with,
you can say:
> copy con: config.sys
LASTDRIVE=Z
^Z
> copy con: autoexec.bat
@echo off
redir.com
^Z
15 Quit doscmd.
16 You know have a bootable pseudo disk which will automatically call
the magic redir program, which installs FreeBSD disks. To use them
add lines to your .doscmdrc such as:
assign D: /usr/dos
assign P: -ro /usr/prb
Note that you will not always be able to access every file due to
naming problems.
If doscmd encounters an interrupt which is unimplemented, it will print a
message such as:
Unknown interrupt 21 function 99
and exit.
If doscmd emits the message X11 support not compiled in when supplied the
-x switch, this support can be added by defining an environment variable
X11BASE which points to the installed X Window System (normally
/usr/X11R6) and then typing make install in the source directory (normally
/usr/src/usr.bin/doscmd). For this to work, the X programmer's kit
must have been installed.
Pace Willisson,
Paul Borman
The doscmd program first appeared in BSD/386.
FreeBSD 5.2.1 January 30, 1995 FreeBSD 5.2.1 [ Back ] |
