|
|
|
slattach(8) -- Attaches a serial line to a network interface
|
|
The slattach command assigns a tty line to a network interface, allowing terminal devices to communicate across a network. The tty line is attached to the first available network interface (sl0, sl1, ... |
|
smsd(8) -- The SysMan Station daemon
|
|
The SysMan Station is a client-server application consisting of a daemon (smsd) and the SysMan Station graphical user interface (sysman_station(8)). The SysMan Station provides the ability to monitor ... |
|
|
smtpd(8) -- Sends mail over the Internet
|
|
The sendmail command sends a message to one or more recipients, routing the message over whatever networks are necessary. The sendmail command does internetwork forwarding as necessary to deliver the ... |
|
snmpd(8) -- Simple Network Management Protocol (SNMP) agent daemon
|
|
The snmpd daemon is an extensible SNMP agent that starts automatically at boot time. It listens on the snmp service port specified in the /etc/services file for SNMP requests and for local subagents w... |
|
snmpd.conf(8) -- Simple Network Management Protocol (SNMP) agent daemon
|
|
The snmpd daemon is an extensible SNMP agent that starts automatically at boot time. It listens on the snmp service port specified in the /etc/services file for SNMP requests and for local subagents w... |
|
snmpi(8) -- The extensible SNMP subagent data initializer
|
|
The snmpi program emits subtree object table initialization C code to be compiled and linked with the method routines as part of an extensible SNMP subagent. For a complete description of using snmpi ... |
|
snmp_request(8) -- Sends SNMPv1 and SNMPv2 request PDUs to an agent and prints the agent's response
|
|
The snmp_request program sends an SNMP Get, GetBulk, GetNext, or Set request to a logically remote SNMP agent, and prints the agent's response. |
|
snmp_traprcv(8) -- A program that listens for SNMP trap messages and prints any it receives
|
|
The snmp_traprcv program listens on the SNMP Trap port specified in the /etc/services file. If no entry exists in the /etc/services file, the program listens on port 162. If any SNMP trap messages arr... |
|
snmp_trapsnd(8) -- A program that sends SNMPv1 and SNMPv2 traps
|
|
The snmp_trapsnd program encodes an SNMPv1 Trap protocol data unit (PDU) (see RFC 1215) or a SNMPv2 Trap PDU (see RFC 1905) into an SNMP message, and sends it to the specified host(s). All data fields... |
|
spray(8) -- Spray packets
|
|
The spray command uses RPC to send a one-way stream of packets to the specified host and reports how many were received, as well as the transfer rate. The host argument can be either a name or an Inte... |
|
sprayd(8) -- Spray server
|
|
The rpc.sprayd daemon is a server that records the packets sent by the spray(8) command. The rpc.sprayd daemon is normally invoked by the inetd(8) daemon by removing the comment character (#) at the b... |
|
srconfig(8) -- Displays and controls source routing functions and parameters for communication on token ring networ...
|
|
The srconfig command reads and modifies entries in the your local system's source routing database. For every remote system on an extended token ring network with which your local system communicates... |
|
sshd(8) -- Secure shell daemon
|
|
The sshd2 Secure Shell daemon runs on the Secure Shell server. It is normally run as root, and is the server counterpart for ssh2. Together, these programs replace and extend the rlogin and rsh servic... |
|
sshd-check-conf(8) -- Checks what the configuration allows or denies based on the incoming user and/or the host name
|
|
The sshd-check-conf command checks how the sshd2 daemon will react to an incoming user, based on the user name and the remote host name given as parameters. The following parameters are checked: Allow... |
|
sshd2(8) -- Secure shell daemon
|
|
The sshd2 Secure Shell daemon runs on the Secure Shell server. It is normally run as root, and is the server counterpart for ssh2. Together, these programs replace and extend the rlogin and rsh servic... |
