|
|
|
hppa/boot.conf(8) -- hppa-specific bootstrap
|
|
The main purpose of this program is to load the system kernel while dealing with the various features of the PA-RISC hardware. As described in boot_hppa(8), this program is loaded by the PDC firmware ... |
|
bootparamd(8) -- boot parameter server
|
|
bootparamd is a server process that provides information to diskless clients necessary for booting. It consults the file /etc/bootparams. It should normally be started from /etc/rc. This version will ... |
|
|
alpha/boot_alpha(8) -- Alpha system bootstrapping procedures
|
|
Cold starts When powered on, the SRM firmware will proceed to its initialization, and will boot an operating system if the auto_action variable is set to ``boot'' or ``restart'', or will wait for ... |
|
amd64/boot_amd64(8) -- amd64 system bootstrapping procedures
|
|
Cold starts The Athlon64 computers and clones will perform a POST (Power On Self Test) upon being booted cold. This test will find and initialize memory, keyboard, and other devices. It will search fo... |
|
cats/boot_cats(8) -- CATS system bootstrapping procedures
|
|
System startup When powered on, after a panic, or if the system is rebooted via reboot(8) or shutdown(8), the Cyclone or ABLE firmware will proceed to its initialization, and will try to boot an opera... |
|
boot_config(8) -- how to change kernel configuration at boot
|
|
BOOT_CONFIG is a kernel option that makes it possible to change the configuration at boot time. The same interface is available from userland, using the -e argument to config(8). The boot time configu... |
|
hp300/boot_hp300(8) -- hp300 system bootstrapping procedures
|
|
Cold starts When powered on, the hp300 firmware will proceed to its initialization, and will boot an operating system from the first bootable device found. By pressing the ``enter'' key during the i... |
|
hppa/boot_hppa(8) -- hppa system bootstrapping procedures
|
|
System starts When powered on, after a panic, or if the system is rebooted via reboot(8) or shutdown(8), the hppa firmware (``PDC'') will proceed to its initialization, and will boot an operating sy... |
|
i386/boot_i386(8) -- i386 system bootstrapping procedures
|
|
Cold starts The PC AT clones will perform a POST (Power On Self Test) upon being booted cold. This test will find and initialize memory, keyboard, and other devices. It will search for and initialize ... |
|
luna88k/boot_luna88k(8) -- luna88k system bootstrapping procedures
|
|
Boot process description When powered on, or after a system reboot, the luna88k ROM monitor will proceed to its initialization, and will boot the operating system configured in nvram if autoboot is en... |
|
mac68k/boot_mac68k(8) -- mac68k-specific system bootstrapping procedures
|
|
Power fail and crash recovery Normally, the OpenBSD kernel on the mac68k architecture is booted from the native operating system by means of an application program. When the kernel takes over, it init... |
|
macppc/boot_macppc(8) -- macppc system bootstrapping procedures
|
|
System startup When powered on, after a panic, or if the system is rebooted via reboot(8) or shutdown(8), the Open Firmware will proceed to its initialization, and will boot an operating system if the... |
|
mvme68k/boot_mvme68k(8) -- mvme68k system bootstrapping procedures
|
|
Cold starts When powered on, the mvme68k BUG firmware will proceed to its initialization, and will boot an operating system if autoboot is enabled. By sending a ``break'' to the serial line during t... |
|
mvme88k/boot_mvme88k(8) -- mvme88k system bootstrapping procedures
|
|
Cold starts When powered on, the mvme88k BUG firmware will proceed to its initialization, and will boot an operating system if autoboot is enabled. By sending a ``break'' to the serial line during t... |
|
sparc/boot_sparc(8) -- sparc system bootstrapping procedures
|
|
System starts When powered on, after a panic, or if the system is rebooted via reboot(8) or shutdown(8), the PROM will proceed to its initialization, and will boot an operating system if autoboot is e... |
