|
|
e2fsck(8) -- check a Linux second extended file system
|
|
e2fsck is used to check a Linux second extended file system (e2fs). E2fsck also supports ext2 filesystems countaining a journal, which are also sometimes known as ext3 filesystems. device is the devic... |
|
e2image(8) -- Save critical ext2 filesystem data to a file
|
|
The e2image program will save critical filesystem data on the ext2 filesystem located on device to a file specified by image-file. The image file may be examined by dumpe2fs and debugfs, by using the ... |
|
e2label(8) -- Change the label on an ext2 filesystem
|
|
e2label will display or change the filesystem label on the ext2 filesystem located on device. If the optional argument new-label is not present, e2label will simply display the current filesystem labe... |
|
efibootmgr(8) -- manipulate the EFI Boot Manager
|
|
efibootmgr is a userspace application used to modify the Intel Extensible Firmware Interface (EFI) Boot Manager. This application can create and destroy boot entries, change the boot order, change the... |
|
elilo(8) -- install EFI boot loader
|
|
This manual page documents briefly the elilo command, which was written specifically for the Debian distribution to simplify configuring and using the elilo.efi bootloader. There are two parts to elil... |
|
eliloalt(8) -- manipulate elilo alternate
|
|
The eliloalt command makes it possible to coerce elilo to boot an alternate kernel configuration one time only, as when engaging in kernel development or debugging. |
|
elvtune(8) -- I/O elevator tuner
|
|
elvtune allows to tune the I/O elevator per blockdevice queue basis. The tuning can be safely done at runtime. Tuning the elevator means being able to change disk performance and interactiveness. In t... |
|
exicyclog(8) -- program to cycle exim logs
|
|
The exicyclog script cycles the main and reject log files. Each time it is run the files get 'shuffled down' by one. The mainlog file becomes mainlog.1, the previous mainlog.1 becomes mainlog.2 and ... |
|
exigrep(8) -- program to extract information from exim logs
|
|
exigrep is a Perl script, provided in the util directory, that extracts from one or more log files all entries relevant to any message whose log entries contain at least one that matches a given patte... |
|
exim(8) -- Mail Transfer Agent
|
|
Exim is a mail transport agent (MTA) developed at the University of Cambridge for use on Unix systems connected to the Internet. It is freely available under the terms of the GNU General Public Licenc... |
|
eximconfig(8) -- interactive configure script for exim
|
|
The perl script eximconfig asks you a series of questions, and writes an exim.conf file accordingly. It will destroy any customisation you have made to the configuration file, so you probably only wan... |
|
eximstats(8) -- exim mail statistics
|
|
A Perl script called eximstats is supplied in the util directory. This has been hacked about quite a bit over time. It now gives quite a lot of information by default, but there are options for suppre... |
|
exim_db(8) -- program to maintain exim mailer hint databases
|
|
Three utility programs are provided for maintaining the DBM files that Exim uses to contain its delivery hint information. Each program requires two arguments. The first specifies the name of Exim's ... |
