|
|
|
usbd(8) -- supervise USB attach/detach
|
|
The usbd utility handles USB device attachment and detachment. It does two things. Through opening the /dev/usb0, /dev/usb1, etc. devices, it enables the kernel to handle change requests from attached... |
|
usbdevs(8) -- show USB devices connected to the system
|
|
The usbdevs utility prints a listing of all USB devices connected to the system with some information about each device. The indentation of each line indicates its distance from the root. The options ... |
|
|
verify_krb5_conf(8) -- checks krb5.conf for obvious errors
|
|
verify_krb5_conf reads the configuration file krb5.conf, or the file given on the command line, and parses it, thereby verifying that the syntax is not correctly wrong. If the file is syntactically co... |
|
vinum(8) -- Logical Volume Manager control program
|
|
The vinum utility communicates with the kernel component of the Vinum logical volume manager. It is designed either for interactive use, when started without command line arguments, or to execute a si... |
|
vipw(8) -- edit the password file
|
|
The vipw utility edits the password file after setting the appropriate locks, and does any necessary processing after the password file is unlocked. If the password file is already locked for editing ... |
|
vmstat(8) -- report virtual memory statistics
|
|
The vmstat utility reports certain kernel statistics kept about process, virtual memory, disk, trap and cpu activity. The options are as follows: -c Repeat the display count times. The first display i... |
|
vnconfig(8) -- configure and enable memory disks
|
|
The mdconfig utility configures and enables md(4) devices. Options indicate an action to be performed: -a Attach a memory disk. This will configure and attach a memory disk with the parameters specifi... |
|
watch(8) -- snoop on another tty line
|
|
The watch utility allows the user to examine all data coming through a specified tty using the snp(4) device. If the snp(4) device is not available, watch will attempt to load the module (snp). The wa... |
|
watchdogd(8) -- Software watchdog daemon
|
|
The watchdogd utility interfaces with the kernel's software watchdog facility to ensure that the system is in a working state. If watchdogd is unable to interface with the kernel over a specific time... |
|
wicontrol(8) -- configure Lucent, Intersil, & Atheros wireless devices
|
|
The wicontrol utility controls the operation of Lucent, Intersil, & Atheros-based wireless networking devices via wi(4) or ath(4) driver. You should not use this program to configure IEEE 802.11 param... |
|
wire-test(8) -- test your network interfaces and local IP address
|
|
wire-test is used to find out what Amd thinks are the first two network interfaces and network names/numbers used, as well as the IP address used for Amd to NFS-mount itself. If host is specified, the... |
|
wlconfig(8) -- read/write wavelan config parameters
|
|
The wlconfig utility can be used to read and set parameters for the NCR/AT&T Wavelan radio LAN card. Various parameters stored in the nonvolatile Parameter Storage Area (PSA) on the card can be modifi... |
|
yp(8) -- description of the YP/NIS system
|
|
The YP subsystem allows network management of passwd, group, netgroup, hosts, services, rpc, bootparams and ethers file entries through the functions getpwent(3), getgrent(3), getnetgrent(3), gethoste... |
|
YP(8) -- description of the YP/NIS system
|
|
The YP subsystem allows network management of passwd, group, netgroup, hosts, services, rpc, bootparams and ethers file entries through the functions getpwent(3), getgrent(3), getnetgrent(3), gethoste... |
|
ypbind(8) -- NIS domain binding daemon
|
|
The ypbind utility is the process that maintains NIS binding information. At startup, it searches for an NIS server responsible for serving the system's default domain (as set by the domainname(1) co... |
