|
|
|
asf(8) -- add symbol files
|
|
By default, asf reads kldstat(8) output from standard input and writes to standard output a list of gdb(1) commands to add symbol files from KLDs in subdirectories of the subdirectory modules of the c... |
|
atacontrol(8) -- ATA device driver control program
|
|
The atacontrol utility is a control program that provides the user access and control to the FreeBSD ata(4) subsystem. The atacontrol utility can cause severe system crashes and loss of data if used i... |
|
|
atm(8) -- user configuration and display command for HARP ATM interface
|
|
atm configures and displays the status of the Host ATM Research Platform (HARP) networking software. The subcommands fall into several categories: Interface management subcommands allow manipulation o... |
|
atmarpd(8) -- ATMARP/SCSP interface daemon
|
|
The atmarpd utility provides an interface between the ATMARP server in the kernel and the SCSP daemon for the Host ATM Research Platform (HARP) networking software. The atmarpd utility reads the ATMAR... |
|
atmconfig(8) -- ATM configuration tool
|
|
The atmconfig tool is used to configure the Netgraph ATM network sub-system. The command line of atmconfig generally consists of common options followed by a command string, optionally followed by sub... |
|
atrun(8) -- run jobs queued for later execution
|
|
Atrun runs jobs queued by at(1). Root's crontab(5) file /etc/crontab has to contain the line */5 * * * * root /usr/libexec/atrun so that atrun gets invoked every five minutes. At every invocation, at... |
|
badsect(8) -- create files to contain bad sectors
|
|
The badsect utility makes a file to contain a bad sector. Normally, bad sectors are made inaccessible by the standard formatter, which provides a forwarding table for bad sectors to the driver. If a d... |
|
bcmfw(8) -- firmware download utility for Broadcom BCM2033 chip based Bluetooth USB devices
|
|
The bcmfw utility downloads the specified mini-driver and firmware files to the specified device. This utility will only work with Broadcom BCM2033 chip based Bluetooth USB devices. The identification... |
|
boot(8) -- system bootstrapping procedures
|
|
Power fail and crash recovery. Normally, the system will reboot itself at power-up or after crashes. An automatic consistency check of the file systems will be performed, and unless this fails, the sy... |
|
boot0cfg(8) -- boot manager installation/configuration utility
|
|
The FreeBSD `boot0' boot manager permits the operator to select from which disk and slice an i386 machine (PC) is booted. Note that what are referred to here as ``slices'' are typically called ``pa... |
|
bootparamd(8) -- boot parameter server
|
|
The bootparamd utility is a server process that provides information to diskless(8) clients necessary for booting. It consults the /etc/bootparams file. This version will allow the use of aliases on t... |
|
bootpd(8) -- Internet Boot Protocol server/gateway
|
|
The bootpd utility implements an Internet Bootstrap Protocol (BOOTP) server as defined in RFC951, RFC1532, and RFC1533. The bootpgw utility implements a simple BOOTP gateway which can be used to forwa... |
|
bootpef(8) -- BOOTP Extension File compiler
|
|
The bootpef utility builds the Extension Path files described by RFC 1497 (tag 18). If any client-name arguments are specified, then bootpef compiles the extension files for only those clients. |
|
bootpgw(8) -- Internet Boot Protocol server/gateway
|
|
The bootpd utility implements an Internet Bootstrap Protocol (BOOTP) server as defined in RFC951, RFC1532, and RFC1533. The bootpgw utility implements a simple BOOTP gateway which can be used to forwa... |
|
bootptest(8) -- send BOOTP queries and print responses
|
|
The bootptest utility sends BOOTP requests to the host specified as server-name at one-second intervals until either a response is received, or until ten requests have gone unanswered. After a respons... |
